Mass production of industrial tunnel oxide passivated contacts (i‐TOPCon) silicon solar cells with average efficiency over 23% and modules over 345 W
- 31 July 2019
- journal article
- research article
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 27 (10) , 827-834
Abstract
We present an industrial tunnel oxide passivated contacts (i‐TOPCon) bifacial crystalline silicon (c‐Si) solar cell based on large‐area n‐type substrate. The interfacial thin SiO2 is thermally growth and in situ capped by an intrinsic poly‐Si layer deposited by low‐pressure chemical vapor deposition (LPCVD). The intrinsic poly‐Si layer is doped in an industrial POCl3 diffusion furnace to form the n+ poly‐Si at the rear, which shows an excellent surface passivation characteristics with J0 = 2.6 fA/cm2 when passivated by a SiNx:H layer deposited by plasma‐enhanced chemical vapor deposition (PECVD). With an industrial fabrication process, the cells are manufactured with screen‐printed front and rear metallization, using large‐area 6‐in. n‐type Czochralski (Cz) Si wafers. We demonstrate an average front‐side efficiency greater than 23% and an open‐circuit voltage Voc greater than 700 mV. These results are based on more than 20 000 pieces of cells from mass production on a single day, in an old conventional multicrystalline silicon (mc‐Si) Al‐back surface field (BSF) cell workshop, which has been upgraded to i‐TOPCon process. The best cell efficiency reaches 23.57%, as independently confirmed by Fraunhofer CalLab. A median module power greater than 345 W and a best module power greater than 355 W are demonstrated with double‐glass bifacial i‐TOPCon modules consisting of 120 pieces of half‐cut 161.7 mm pseudosquare i‐TOPCon cells with nine busbars.Keywords
Funding Information
- Technology Top Runner Program of China
- National 10,000 Talents Program in China
This publication has 27 references indexed in Scilit:
- Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristicsSolar Energy Materials and Solar Cells, 2014
- >750 mV open circuit voltage measured on 50 μm thick silicon heterojunction solar cellApplied Physics Letters, 2013
- Improved Parameterization of Auger Recombination in SiliconEnergy Procedia, 2012
- 22.8% efficient silicon solar cellApplied Physics Letters, 1989
- A 720 mV open circuit voltage SiOx:c-Si:SiOx double heterostructure solar cellApplied Physics Letters, 1985
- Advantages of metal-insulator-semiconductor structures for silicon solar cellsSolar Cells, 1983
- Solar cell fill factors: General graph and empirical expressionsSolid-State Electronics, 1981
- High-performance transistors with arsenic-implanted polysil emittersIEEE Journal of Solid-State Circuits, 1976
- Semi-Insulating Polycrystalline-Silicon (SIPOS) Passivation TechnologyJapanese Journal of Applied Physics, 1976
- The electrical properties of polycrystalline silicon filmsJournal of Applied Physics, 1975