Abstract
Safer environmental requirements have resulted in significant interest in natural polymer-based materials to increase sustainability. In this perspective, wood polymer nanocomposites are of particular interest. Wood polymer nanocomposites were prepared from modified soybean oil, wood flour and cetyl trimethylammonium bromide modified bentonite using the compression-molding technique. Fourier transform infrared spectroscopy and X-ray diffractometric studies were used to confirm the successful modification of bentonite. Incorporation of 3 wt% of bentonite in the composites produced significant improvement in properties compared to those of 1 and 5 wt%. Furthermore, in comparison to the unfilled nanocomposites, nanoclay-filled ones showed an enhanced UV resistance property as judged by lower weight loss and carbonyl index. The decrease in mechanical properties of UV-exposed unfilled composites was more significant compared to those of nanoclay-filled composites. Scanning electron microscope and transmission electron microscope were used to study the surface morphology and distribution of the bentonite into the composites. In addition, with the incorporation of bentonite, significant increase in thermal, mechanical and flame-retarding properties was observed.
Funding Information
  • University Grants Commission (F117.1/ 201415/RGNF201415SCASS82974)

This publication has 39 references indexed in Scilit: