Detection of Cigarette Smoke Using a Surface-Acoustic-Wave Gas Sensor with Non-Polymer-Based Oxidized Hollow Mesoporous Carbon Nanospheres
Open Access
- 24 April 2019
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 10 (4) , 276
Abstract
The objective of this research was to develop a surface-acoustic-wave (SAW) sensor of cigarette smoke to prevent tobacco hazards and to detect cigarette smoke in real time through the adsorption of an ambient tobacco marker. The SAW sensor was coated with oxidized hollow mesoporous carbon nanospheres (O-HMC) as a sensing material of a new type, which replaced a polymer. O-HMC were fabricated using nitric acid to form carboxyl groups on carbon frameworks. The modified conditions of O-HMC were analyzed with Scanning Electron Microscopy (SEM), Fourier transform infrared spectrometry (FTIR), and X-ray diffraction (XRD). The appropriately modified O-HMC are more sensitive than polyacrylic acid and hollow mesoporous carbon nanospheres (PAA-HMC), which is proven by normalization. This increases the sensitivity of a standard tobacco marker (3-ethenylpyridine, 3-EP) from 37.8 to 51.2 Hz/ppm and prevents the drawbacks of a polymer-based sensing material. On filtering particles above 1 μm and using tar to prevent tar adhesion, the SAW sensor detects cigarette smoke with sufficient sensitivity and satisfactory repeatability. Tests, showing satisfactory selectivity to the cigarette smoke marker (3-EP) with interfering gases CH4, CO, and CO2, show that CO and CO2 have a negligible role during the detection of cigarette smoke.Keywords
Funding Information
- Ministry of Science and Technology, Taiwan (MOST 105-2221-E-007-062-MY3, MOST 107-2321-B-866-002-)
This publication has 33 references indexed in Scilit:
- Detection of Secondhand Cigarette Smoke via Nicotine Using Conductive Polymer FilmsNicotine & Tobacco Research, 2013
- Environmental monitoring of secondhand smoke exposureTobacco Control, 2012
- A review of environmental tobacco smoke and its determination in airTrAC Trends in Analytical Chemistry, 2010
- Simultaneous determination of nicotine and 3-vinylpyridine in single cigarette tobacco smoke and in indoor air using direct extraction to solid phaseInternational Journal of Environmental Analytical Chemistry, 2009
- Guidance for industry: patient-reported outcome measures: use in medical product development to support labeling claims: draft guidanceHealth and Quality of Life Outcomes, 2006
- Cigarette smoking: cancer risks, carcinogens, and mechanismsLangenbeck's Archives of Surgery, 2006
- The effect of tobacco ingredients on smoke chemistry. Part I: Flavourings and additivesFood and Chemical Toxicology, 2004
- An overview of the effects of tobacco ingredients on smoke chemistry and toxicityFood and Chemical Toxicology, 2004
- Health Hazards of Passive SmokingAnnual Review of Public Health, 1988
- A diffusion monitor to measure exposure to passive smokingEnvironmental Science & Technology, 1987