A novel current steering charge pump with low current mismatch and variation
- 11 August 2016
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 48, 1666-1669
Abstract
A charge pump circuit to minimize current mismatch and current variation over a wide voltage compliance range is proposed. A feedback loop is used to cancel both deterministic and random mismatches between charging and discharging current to minimize PLL reference spurs and static phase offset. A current compensation circuit is used to minimize current variation to avoid bandwidth variation and loop instability. The circuit can operate at low supply voltage. The power overhead due to added circuitry is 3.36% making it suitable for low-power and low-voltage applications. The proposed current-steering charge pump circuit achieves mismatch lower than 0.44% over the output voltage range from 0.06 V to 0.85 V. Also the current variation is reduced to less than 1.19% when the output voltage varies from 0.06 V to 0.85 V in the 65 nm CMOS process with 1 V supply.Keywords
This publication has 4 references indexed in Scilit:
- PLL charge pump with adaptive body-bias compensation for minimum current variationElectronics Letters, 2012
- An improved high speed charge pump in 90 nm CMOS technology2011
- Reduction of pump current mismatch in charge-pump PLLElectronics Letters, 2009
- A wide range PLL for 64X speed CD-ROMs & 10X speed DVD-ROMsIEEE Transactions on Consumer Electronics, 2000