Corrosion resistance of stainless steel joints bonded with a Ni‐based amorphous interlayer
Authors:
- 27 March 2007
- journal article
- research article
- Published by Emerald Publishing in Anti-Corrosion Methods and Materials
- Vol. 54 (2) , 68-73
Abstract
Purpose: To study the metallurgical characteristics obtained from the process of diffusion bonding of 316L stainless steel (SS) using a commercial Ni‐based amorphous alloy interlayer and its effect on the corrosion resistance of the self‐joined SS‐amorphous alloy‐SS junction zone.Design/methodology/approach: Squared samples of austenitic SS were joined using a brazing metallic foil BMF‐15® in a sandwich‐like arrangement. The samples were then placed into a resistance furnace with a controlled N2 atmosphere. The joining process was carried out at 1105 and 1170°C holding the samples in the furnace for periods of 5, 10, 15, 20 and 40 min. The junction zone was evaluated by scanning electron microscopy (SEM) in order to determine the metallurgical structure induced during the process. The corrosion resistance of the SS/BMF‐15®/SS joints were evaluated using DC electrochemical methods on joined samples immersed in a 3.5 wt% NaCl solution.Findings: The samples of 316L SS showed self‐diffusion bonding at both temperatures which are quality depended upon the holding times. A concentration of second phases was observed by SEM at the BMF‐15®. The joints developed crevice corrosion at open circuit potential due to a galvanic couple formed between the SS and the amorphous alloy, and presented preferential dissolution of the Ni‐amorphous alloy under anodic polarization in 3.5 per cent NaCl solution at room temperature.Originality/value: This work presents a systematic study of the self‐diffusion bonding process of SS pieces jointed with an amorphous alloy interlayer and the metallurgical effects on its corrosion resistance of in a 3.5 wt% NaCl solution.Keywords
This publication has 8 references indexed in Scilit:
- Joining of Silicon Nitride to Metal (Mo and Ti) Using a Cu-Foil InterlayerMaterials Science Forum, 2006
- Temperature and potential dependence of crevice corrosion of AISI 316 stainless steelCorrosion Science, 2001
- Induction brazing of Inconel 718 to Inconel X-750 using Ni–Cr–Si–B amorphous foilJournal of Materials Processing Technology, 2000
- Some aspects of diffusion in ceramicsJournal de Physique III, 1994
- The nucleation and growth of corrosion pits on stainless steelCorrosion Science, 1993
- Pitting Behavior of Duplex 308L Stainless Steel in Methanol/Water/HCl SolutionsCorrosion, 1982
- Crevice Corrosion of Stainless Steels: II. Experimental studiesBritish Corrosion Journal, 1978
- Crevice Corrosion of Stainless Steels: I. A Mathematical ModelBritish Corrosion Journal, 1978