Overall Effectiveness of a Blade Endwall With Jet Impingement and Film Cooling
- 14 November 2013
- journal article
- research article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 136 (3) , 031901
Abstract
Ever-increasing thermal loads on gas turbine components require improved cooling schemes to extend component life. Engine designers often rely on multiple thermal protection techniques, including internal cooling and external film cooling. A conjugate heat transfer model for the endwall of a seven-blade cascade was developed to examine the impact of both convective cooling and solid conduction through the endwall. Appropriate parameters were scaled to ensure engine-relevant temperatures were reported. External film cooling and internal jet impingement cooling were tested separately and together for their combined effects. Experiments with only film cooling showed high effectiveness around film-cooling holes due to convective cooling within the holes. Internal impingement cooling provided more uniform effectiveness than film cooling, and impingement effectiveness improved markedly with increasing blowing ratio. Combining internal impingement and external film cooling produced overall effectiveness values as high as 0.4. A simplified, one-dimensional heat transfer analysis was used to develop a prediction of the combined overall effectiveness using results from impingement only and film cooling only cases. The analysis resulted in relatively good predictions, which served to reinforce the consistency of the experimental data.Keywords
This publication has 32 references indexed in Scilit:
- Effect of Thermal Conductivity on Heat Transfer From a Flat Plate With Combined Impingement and Film Cooling2012
- Evaluating the Effects of Internal Impingement Cooling on a Film Cooled Turbine Blade Leading Edge2010
- Experimental Simulation of a Film Cooled Turbine Blade Leading Edge Including Thermal Barrier Coating EffectsJournal of Turbomachinery, 2010
- Numerical Simulation of a Simulated Film Cooled Turbine Blade Leading Edge Including Conjugate Heat Transfer Effects2009
- Internal and Film Cooling of a Flat Plate With Conjugate Heat Transfer2007
- Convective Heat Transfer Through Film Cooling Holes of a Gas Turbine Blade Leading Edge2005
- Net Heat Flux Reduction and Overall Effectiveness for a Turbine Blade Leading Edge2005
- Adiabatic and Overall Effectiveness for a Film Cooled Blade2004
- Conjugate Heat Transfer Analysis for Film Cooling Configurations With Different Hole Geometries2003
- An Infrared Technique for Evaluating Turbine Airfoil Cooling DesignsJournal of Turbomachinery, 1999