Use of recycled metal waste in the oil and gas industry

Authors:

Abstract
Currently, the development of technology, especially in electronics, oil and gas, engineering and construction industries, has dramatically increased the demand for non-ferrous, rare and precious metals. In the oil and gas industry, copper-based alloys such as brass and bronze are widely used because of their corrosion resistance and mechanical strength. These alloys are used in downhole equipment, offshore platforms, pipeline fittings, and automated control systems. The growing demand for such materials has stimulated interest in recycling alternative sources of raw materials, including scrap metal and waste. Production waste and scrap brass and bronze collected during maintenance make it possible to re-extract precious metals in the composition of copper, zinc, tin, nickel. In the course of the study, hydrometallurgical methods for obtaining copper and zinc from brass and bronze waste were studied, and effective technological schemes were proposed. Sulfuric acid was used as the leaching reagent, and the "hot leaching" and "cold leaching" methods were tested. The metal from brass contained 84% Cu and 14% Zn, and from bronze – 81% Cu and 15% Zn. In addition, during cooling, a precipitate consisting of 70% tin was released. Copper with 99% purity and zinc with 91% purity were precipitated from the solution by electrolysis. This technology will make it possible to use resources efficiently, establish wastefree production and improve environmental safety by recycling scrap metal in the oil and gas industry. This solution will reduce the cost of production of equipment, reducing dependence on imported raw materials.