AUA.F. Urazova

A.F. Urazova

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


A.F. Urazova has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    INVESTIGATION OF THE POSSIBILITY OF PRODUCING LIQUID GLASS BASED ON OPOKA FROM THE TASKALA DEPOSIT

    by A.F. Urazova, S.S. Satayeva, D.S. Nazarova, A.I. Khatsrinov, G.A. Otegenova

    This paper examines the feasibility of producing liquid glass using a natural siliceous raw material - flake from the Taskala deposit, located in the West Kazakhstan region of the Republic of Kazakhstan. Physicochemical analyses of the source material were performed, determining its chemical and mineralogical composition, silica content, and clay content. Chemical composition revealed a SiO2 content of 70-78%, which meets the raw material requirements for liquid glass production. The process of alkaline treatment of opoka using 20% solutions of sodium and potassium hydroxide has been studied. The temperature and time parameters affecting the completeness of silica dissolution have been studied. It has been established that at a temperature of 95-98 °C and a duration of 2-3 hours, the best result is achieved in terms of the yield of liquid glass with a silicate module within the regulatory limits when the raw material: alkali ratio is 1:2. Alkaline treatment of flasks using 20% sodium and potassium hydroxide solutions was studied. Temperature and time parameters influencing the completeness of silica dissolution were examined. It was found that a temperature of 95-98°C and a duration of 2-3 hours with a raw material: alkali ratio of 1:2 yielded the best liquid glass with a silicate modulus within the specified limits. Thus, the opoka from the Taskalinsky deposit can be effectively used as a raw material for the production of liquid glass, which has been confirmed by laboratory tests and a feasibility study of the process.

  • Use of recycled metal waste in the oil and gas industry

    by West Kazakhstan Agrarian and Technical University named after Zhangir Khan, S.T. Yermukhanova, A.K. Abdygaliyeva, A.F. Urazova

    Currently, the development of technology, especially in electronics, oil and gas, engineering and construction industries, has dramatically increased the demand for non-ferrous, rare and precious metals. In the oil and gas industry, copper-based alloys such as brass and bronze are widely used because of their corrosion resistance and mechanical strength. These alloys are used in downhole equipment, offshore platforms, pipeline fittings, and automated control systems. The growing demand for such materials has stimulated interest in recycling alternative sources of raw materials, including scrap metal and waste. Production waste and scrap brass and bronze collected during maintenance make it possible to re-extract precious metals in the composition of copper, zinc, tin, nickel. In the course of the study, hydrometallurgical methods for obtaining copper and zinc from brass and bronze waste were studied, and effective technological schemes were proposed. Sulfuric acid was used as the leaching reagent, and the "hot leaching" and "cold leaching" methods were tested. The metal from brass contained 84% Cu and 14% Zn, and from bronze – 81% Cu and 15% Zn. In addition, during cooling, a precipitate consisting of 70% tin was released. Copper with 99% purity and zinc with 91% purity were precipitated from the solution by electrolysis. This technology will make it possible to use resources efficiently, establish wastefree production and improve environmental safety by recycling scrap metal in the oil and gas industry. This solution will reduce the cost of production of equipment, reducing dependence on imported raw materials.

  • PURIFICATION OF NATURAL GAS FROM THE KARACHAGANAK GAS CONDENSATE FIELD FROM ACIDIC COMPONENTS

    by Zhangir Khan West Kazakhstan Agrarian Technical University, S.S. Satayeva, F.ZH. Akhmetova, A.F. Urazova, M.ZH. Ryskaliyev, E.M. Iskaliyev

    Purification of natural gas from sulfur compounds and carbon dioxide remains the main problem of its (gas) preparation for processing. In recent decades, this task has become even more urgent. Excessive entrainment of solid particles and hydrocarbons in the spent amine recirculation system leads to increased foaming in the absorber and an increase in weathering gas, which in turn leads to a decrease in the throughput of the fuel gas purification plant. One of the methods of gas purification is amine purification. An increase in the efficiency of using amine purification is possible due to the modernization of the purification unit. Based on the obtained patterns, a technology for filtering regenerated amine has been developed and investigated, which will significantly increase the energy efficiency and productivity of the process.