Numerical Modeling of a Punch Penetration Test Using the Discrete Element Method
Open Access
- 1 June 2020
- journal article
- research article
- Published by Walter de Gruyter GmbH in Slovak Journal of Civil Engineering
- Vol. 28 (2) , 1-7
Abstract
Understanding the brittleness of rock has a crucial importance in rock engineering applications such as the mechanical excavation of rock. In this study, numerical modeling of a punch penetration test is performed using the Discrete Element Method (DEM). The Peak Strength Index (PSI) as a function of the brittleness index was calculated using the axial load and a penetration graph obtained from numerical models. In the first step, the numerical model was verified by experimental results. The results obtained from the numerical modeling showed a good agreement with those obtained from the experimental tests. The propagation path was also simulated using Voronoi meshing. The fracture was created under the indenter in the first step, and then radial fractures were propagated. The effects of confining pressure and strength parameters on the PSI were subsequently investigated. The numerical results showed that the PSI increases with enhancing the confining pressure and the strength parameter of the rock, including cohesion and the friction angle. A new relationship between the strength parameters and PSI was also introduced based on two variable regressions of the numerical results.Keywords
This publication has 13 references indexed in Scilit:
- A Study on Punch Penetration Test for Performance Estimation of Tunnel Boring MachineJournal of Korean Society For Rock Mechanics, 2012
- Numerical study of the effect of confining stress on rock fragmentation by TBM cuttersInternational Journal of Rock Mechanics and Mining Sciences, 2011
- Assessment of some brittleness indexes in rock-drilling efficiencyRock Mechanics and Rock Engineering, 2009
- Assessment of brittleness using rock strength and density with punch penetration testTunnelling and Underground Space Technology, 2009
- Numerical simulation of the rock fragmentation process induced by indentersInternational Journal of Rock Mechanics and Mining Sciences, 2002
- Use of the punch test for estimating TBM performanceTunnelling and Underground Space Technology, 1998
- Indentation hardness testing of rockInternational Journal of Rock Mechanics and Mining Sciences, 1998
- Use of the distinct element method to perform stress analysis in rock with non-persistent joints and to study the effect of joint geometry parameters on the strength and deformability of rock massesRock Mechanics and Rock Engineering, 1992
- Observations of crack growth in hard rock loaded by an indenterInternational Journal of Rock Mechanics and Mining Sciences, 1984
- Brittleness determination of rocks by different methodsInternational Journal of Rock Mechanics and Mining Sciences, 1974