Rouhollah Basirat
Research Subjects
Rouhollah Basirat has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
Rahim Hassani
4 shared publications- Kamran Goshtasbi
Department of Mining Engineering, Tarbiat Modares University, Tehran, Iran
2 shared publications - Morteza Ahmadi
Department of Mining Engineering, Faculty of Engineering, Tarbiat Modares University, Tehran, Iran
2 shared publications - Rahim Hassani
EOR/CSS Tunnel specialist, AECOM, Toronto, Canada
2 shared publications - Ata Hojatkashani
Islamic Azad Univ. South Tehran Branch
1 shared publication Jafar Khademi Hamidi
Faculty of Engineering , Tarbiat Modares University , Tehran , Iran
1 shared publication
Latest Publications
- Open Access
- 1 September 2026
- Published by KEAI Publishing in Intelligent Geoengineering
- Vol. 3 (3) , 238-254
A Python-based framework for probabilistic rockfall trajectory analysis
- 1 September 2026
- Published by KEAI Publishing in Intelligent Geoengineering
- Vol. 3 (3) , 238-254
Open AccessA Python-based framework for probabilistic rockfall trajectory analysis
- Open Access
- 1 September 2026
- Published by KEAI Publishing in Geohazard Mechanics
- Vol. 4 (3) , 181-190
Tunnel instability mechanisms in anisotropic rock masses under combined static and dynamic loading
- 1 September 2026
- Published by KEAI Publishing in Geohazard Mechanics
- Vol. 4 (3) , 181-190
Open AccessTunnel instability mechanisms in anisotropic rock masses under combined static and dynamic loading
- Open Access
- 16 June 2026
- Published by Springer Nature in Discover Civil Engineering
- Vol. 3 (1) , 138
Longitudinal response of tunnel lining under earthquake excitation in 2D-space simulation
- 16 June 2026
- Published by Springer Nature in Discover Civil Engineering
- Vol. 3 (1) , 138
Open AccessLongitudinal response of tunnel lining under earthquake excitation in 2D-space simulation
- Open Access
- 27 January 2026
- Published by ABMS - Brazilian Association for Soil Mechanics and Geotechnical Engineering in Soils and Rocks
- Vol. 49 (3)
RSF: a python-based analytical framework for geotechnical engineering solutions
This paper presents the design and development of a comprehensive standalone application for geotechnical engineering, built entirely using Python. Unlike conventional commercial platforms or numerical packages, the application focuses on providing transparent, reproducible, and analytically grounded tools for core geotechnical challenges. This article aims to present the topic in a straightforward and easy-to-understand manner. The application includes different independent modules that cover critical areas of soil and rock mechanics, foundation engineering, tunnel lining design, slope stability, and ground improvement. All modules are based on classical solutions, derived from principles such as Rankine’s and Coulomb’s earth pressure theories, Terzaghi’s bearing capacity equations, consolidation and elastic settlement theory, the Hoek–Brown rock failure criterion, etc. The software leverages Python’s scientific libraries for data operations, interpolation, plotting, regression, and features a graphical user interface (GUI) built by Tkinter for interactive input and visualization. By adopting a modular architecture, each analytical solution can be accessed, maintained, and extended independently, promoting both scalability and usability. The program has been validated against standard geotechnical design examples and empirical relationships, showing excellent agreement. It serves both educational and professional purposes.
- 27 January 2026
- Published by ABMS - Brazilian Association for Soil Mechanics and Geotechnical Engineering in Soils and Rocks
- Vol. 49 (3)
Open AccessRSF: a python-based analytical framework for geotechnical engineering solutions
This paper presents the design and development of a comprehensive standalone application for geotechnical engineering, built entirely using Python. Unlike conventional commercial platforms or numerical packages, the application focuses on providing transparent, reproducible, and analytically grounded tools for core geotechnical challenges. This article aims to present the topic in a straightforward and easy-to-understand manner. The application includes different independent modules that cover critical areas of soil and rock mechanics, foundation engineering, tunnel lining design, slope stability, and ground improvement. All modules are based on classical solutions, derived from principles such as Rankine’s and Coulomb’s earth pressure theories, Terzaghi’s bearing capacity equations, consolidation and elastic settlement theory, the Hoek–Brown rock failure criterion, etc. The software leverages Python’s scientific libraries for data operations, interpolation, plotting, regression, and features a graphical user interface (GUI) built by Tkinter for interactive input and visualization. By adopting a modular architecture, each analytical solution can be accessed, maintained, and extended independently, promoting both scalability and usability. The program has been validated against standard geotechnical design examples and empirical relationships, showing excellent agreement. It serves both educational and professional purposes.
- Open Access
- 1 January 2025
- Published by KEAI Publishing in Rock Mechanics Bulletin
- Vol. 4 (1)
Analysis of tunnel lining internal forces under the influence of S and P-waves: An analytical solution and quasi-static numerical method
- 1 January 2025
- Published by KEAI Publishing in Rock Mechanics Bulletin
- Vol. 4 (1)
Open AccessAnalysis of tunnel lining internal forces under the influence of S and P-waves: An analytical solution and quasi-static numerical method
- 2 August 2023
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 42 (1) , 795-805
Estimation of In-Situ Stress Ratio Based on the Monitoring Results of Convergence Meter
- 2 August 2023
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 42 (1) , 795-805
Estimation of In-Situ Stress Ratio Based on the Monitoring Results of Convergence Meter
- 25 November 2022
- Published by Taylor & Francis in Structural Engineering International
- Vol. 34 (1) , 102-113
Nonlinear Seismic Analysis of Ground Structure to Evaluate the Capacity of a Permanent Tunnel Lining
In this paper, in addition to the linear analysis used for typical tunnels, nonlinear seismic analysis of a tunnel has been investigated using pseudo-static method and a damaged concrete behavior model introduced in ABAQUS® software. The simulations were carried out under three conditions, free field, ovaling and racking, at two hazardous earthquake levels according to an Operation Design Earthquake (ODE) and a Maximum Design Earthquake (MDE). Then, the structural capacity curve and the behavior factor for the final tunnel lining were obtained. In order to extend the studies as well as to verify the pseudo-static analyses, seven nonlinear dynamic analyses compatible with the site under MDE conditions have been performed. The results showed that the tunnel lining procedure created limited tensile cracks under compression. At the bottom corners of the tunnel structure, the resultant stresses in the tunnel lining under two earthquakes caused failure and created tensile cracks. Therefore, it was necessary to reinforce the lining at corners. Comparison between different nonlinear time history seismic analysis and pseudo-static methods indicated that the pseudo-static methods resulted in 10–30% less acceleration than the average results obtained from time history analysis.
- 25 November 2022
- Published by Taylor & Francis in Structural Engineering International
- Vol. 34 (1) , 102-113
Nonlinear Seismic Analysis of Ground Structure to Evaluate the Capacity of a Permanent Tunnel Lining
In this paper, in addition to the linear analysis used for typical tunnels, nonlinear seismic analysis of a tunnel has been investigated using pseudo-static method and a damaged concrete behavior model introduced in ABAQUS® software. The simulations were carried out under three conditions, free field, ovaling and racking, at two hazardous earthquake levels according to an Operation Design Earthquake (ODE) and a Maximum Design Earthquake (MDE). Then, the structural capacity curve and the behavior factor for the final tunnel lining were obtained. In order to extend the studies as well as to verify the pseudo-static analyses, seven nonlinear dynamic analyses compatible with the site under MDE conditions have been performed. The results showed that the tunnel lining procedure created limited tensile cracks under compression. At the bottom corners of the tunnel structure, the resultant stresses in the tunnel lining under two earthquakes caused failure and created tensile cracks. Therefore, it was necessary to reinforce the lining at corners. Comparison between different nonlinear time history seismic analysis and pseudo-static methods indicated that the pseudo-static methods resulted in 10–30% less acceleration than the average results obtained from time history analysis.
- Open Access
- 1 June 2020
- Published by Walter de Gruyter GmbH in Slovak Journal of Civil Engineering
- Vol. 28 (2) , 1-7
Numerical Modeling of a Punch Penetration Test Using the Discrete Element Method
Understanding the brittleness of rock has a crucial importance in rock engineering applications such as the mechanical excavation of rock. In this study, numerical modeling of a punch penetration test is performed using the Discrete Element Method (DEM). The Peak Strength Index (PSI) as a function of the brittleness index was calculated using the axial load and a penetration graph obtained from numerical models. In the first step, the numerical model was verified by experimental results. The results obtained from the numerical modeling showed a good agreement with those obtained from the experimental tests. The propagation path was also simulated using Voronoi meshing. The fracture was created under the indenter in the first step, and then radial fractures were propagated. The effects of confining pressure and strength parameters on the PSI were subsequently investigated. The numerical results showed that the PSI increases with enhancing the confining pressure and the strength parameter of the rock, including cohesion and the friction angle. A new relationship between the strength parameters and PSI was also introduced based on two variable regressions of the numerical results.
- 1 June 2020
- Published by Walter de Gruyter GmbH in Slovak Journal of Civil Engineering
- Vol. 28 (2) , 1-7
Open AccessNumerical Modeling of a Punch Penetration Test Using the Discrete Element Method
Understanding the brittleness of rock has a crucial importance in rock engineering applications such as the mechanical excavation of rock. In this study, numerical modeling of a punch penetration test is performed using the Discrete Element Method (DEM). The Peak Strength Index (PSI) as a function of the brittleness index was calculated using the axial load and a penetration graph obtained from numerical models. In the first step, the numerical model was verified by experimental results. The results obtained from the numerical modeling showed a good agreement with those obtained from the experimental tests. The propagation path was also simulated using Voronoi meshing. The fracture was created under the indenter in the first step, and then radial fractures were propagated. The effects of confining pressure and strength parameters on the PSI were subsequently investigated. The numerical results showed that the PSI increases with enhancing the confining pressure and the strength parameter of the rock, including cohesion and the friction angle. A new relationship between the strength parameters and PSI was also introduced based on two variable regressions of the numerical results.
- Open Access
Discrete Element Simulation of Interaction between Hydraulic Fracturing and a Single Natural Fracture
Hydraulic fracturing (HF) treatment is performed to enhance the productivity in the fractured reservoirs. During this process, the interaction between HF and natural fracture (NF) plays a critical role by making it possible to predict fracture geometry and reservoir production. In this paper, interaction modes between HF and NF are simulated using the discrete element method (DEM) and effective parameters on the interaction mechanisms are investigated. The numerical results also are compared with different analytical methods and experimental results. The results showed that HF generally tends to cross the NF at an angle of more than 45° and a moderate differential stress (greater than 5 MPa), and the opening mode is dominated at an angle of fewer than 45°. Two effects of changing in the interaction mode and NF opening were also found by changing the strength parameters of NF. Interaction mode was changed by increasing the friction coefficient, while by increasing the cohesion of NF it was less opened under a constant injection pressure.
Open AccessDiscrete Element Simulation of Interaction between Hydraulic Fracturing and a Single Natural Fracture
Hydraulic fracturing (HF) treatment is performed to enhance the productivity in the fractured reservoirs. During this process, the interaction between HF and natural fracture (NF) plays a critical role by making it possible to predict fracture geometry and reservoir production. In this paper, interaction modes between HF and NF are simulated using the discrete element method (DEM) and effective parameters on the interaction mechanisms are investigated. The numerical results also are compared with different analytical methods and experimental results. The results showed that HF generally tends to cross the NF at an angle of more than 45° and a moderate differential stress (greater than 5 MPa), and the opening mode is dominated at an angle of fewer than 45°. Two effects of changing in the interaction mode and NF opening were also found by changing the strength parameters of NF. Interaction mode was changed by increasing the friction coefficient, while by increasing the cohesion of NF it was less opened under a constant injection pressure.
- Open Access
- 8 April 2019
- Published by MDPI AG in Fractal and Fractional
- Vol. 3 (2) , 17
Determination of the Fractal Dimension of the Fracture Network System Using Image Processing Technique
Fractal dimension (FD) is a critical parameter in the characterization of a rock fracture network system. This parameter represents the distribution pattern of fractures in rock media. Moreover, it can be used for the modeling of fracture networks when the spatial distribution of fractures is described by the distribution of power law. The main objective of this research is to propose an automatic method to determine the rock mass FD in MATLAB using digital image processing techniques. This method not only accelerates analysis and reduces human error, but also eliminates the access limitation to a rock face. In the proposed method, the intensity of image brightness is corrected using the histogram equalization process and applying smoothing filters to the image followed by revealing the edges using the Canny edge detection algorithm. In the next step, FD is calculated in the program using the box-counting method, which is applied randomly to the pixels detected as fractures. This algorithm was implemented in different geological images to calculate their FDs. The FD of the images was determined using a simple Canny edge detection algorithm, a manual calculation method, and an indirect approach based on spectral decay rate. The results showed that the proposed method is a reliable and fast approach for calculating FD in fractured geological media.
- 8 April 2019
- Published by MDPI AG in Fractal and Fractional
- Vol. 3 (2) , 17
Open AccessDetermination of the Fractal Dimension of the Fracture Network System Using Image Processing Technique
Fractal dimension (FD) is a critical parameter in the characterization of a rock fracture network system. This parameter represents the distribution pattern of fractures in rock media. Moreover, it can be used for the modeling of fracture networks when the spatial distribution of fractures is described by the distribution of power law. The main objective of this research is to propose an automatic method to determine the rock mass FD in MATLAB using digital image processing techniques. This method not only accelerates analysis and reduces human error, but also eliminates the access limitation to a rock face. In the proposed method, the intensity of image brightness is corrected using the histogram equalization process and applying smoothing filters to the image followed by revealing the edges using the Canny edge detection algorithm. In the next step, FD is calculated in the program using the box-counting method, which is applied randomly to the pixels detected as fractures. This algorithm was implemented in different geological images to calculate their FDs. The FD of the images was determined using a simple Canny edge detection algorithm, a manual calculation method, and an indirect approach based on spectral decay rate. The results showed that the proposed method is a reliable and fast approach for calculating FD in fractured geological media.