THE EFFECT OF MIXING METHODS BEFORE THE DECOMPOSITION PROCESS OF FERRONICKEL SLAG
Open Access
- 13 December 2023
- journal article
- research article
- Published by SciCell in Acta Metallurgica Slovaca
- Vol. 29 (4) , 187-191
Abstract
Ferronickel slag is a by-product that was obtained from ferronickel production and contains Si and Mg as the main elements. Decomposition process using alkali could decrease energy consumption to process ferronickel slag by decreasing its melting point. The mixing methods prior to the decomposition process could significantly affect interaction between reactants over the process, therefore it is essential to study. The aim of this study is to determine the effect of mixing methods of ferronickel slag and NaOH prior decomposition process on the chemical composition, phase, and microstructure of decomposed ferronickel slag. Two different mixing methods, physical mixing, and impregnation, followed by roasting process at 350 ℃ for 60 minutes were performed, characterized, and analyzed. Thermodynamic analysis was calculated and shows having a good agreement with the characterization results which formation of sodium silicate, magnesium hydroxide and iron oxide were identified. Distribution of product layer of RI can be determined, while spotty decomposition was clearly identified. The effectiveness of impregnation over physical mixing was investigated.Keywords
This publication has 23 references indexed in Scilit:
- A novel utilization of ferronickel slag as a source of magnesium metal and ferroalloy productionJournal of Cleaner Production, 2021
- Leaching kinetics and reactivity evaluation of ferronickel slag in alkaline conditionsCement and Concrete Research, 2020
- Mechanical properties of the concrete containing ferronickel slag and blast furnace slag powderConstruction and Building Materials, 2020
- Effect of ferronickel slag as fine aggregate on properties of concreteConstruction and Building Materials, 2019
- Recycling SiO2 and Al2O3 from the Laterite Nickel Slag in Molten Sodium Hydroxides2018
- Characteristics and reactivity of ferronickel slag powderConstruction and Building Materials, 2017
- Soundness and compressive strength of Portland cement blended with ground granulated ferronickel slagConstruction and Building Materials, 2017
- Expansion due to alkali-silica reaction of ferronickel slag fine aggregate in OPC and blended cement mortarsConstruction and Building Materials, 2016
- Selective recovery of Cr from stainless steel slag by alkaline roasting followed by water leachingHydrometallurgy, 2015
- Alkali–silica reactivity of cementitious materials using ferro-nickel slag fine aggregates produced in different cooling conditionsConstruction and Building Materials, 2015