Design of a Power Regulated Circuit with Multiple LDOs for SoC Applications
Open Access
- 3 September 2022
- journal article
- research article
- Published by MDPI AG in Electronics
- Vol. 11 (17) , 2774
Abstract
In this paper, a power regulated circuit (PRC) is proposed for system-on-a-chip (SoC) applications. The proposed PRC is composed of a limiter, a bandgap reference (BGR), three low-dropout regulators (LDOs), and a bias generator. A high output voltage of an active rectifier is given to the limiter, which limits it to a desired supply voltage for circuits in PRC. The curvature-compensated BGR robust to process, voltage and temperature (PVT) variations are designed to provide a stable reference voltage for three LDOs. The three LDOs are implemented to generate regulated output dc voltages. The proposed PRC is designed and fabricated in 130 nm bipolar-CMOS-DMOS (BCD) technology with die area of 1.9 mm × 0.860 mm, including pads. The measurement results show that the limiter limits the input voltage of (6 V to 20 V) to 5.3 V. The BGR produces a stable reference voltage of 1.24 V with a power supply rejection ratio (PSRR) of −58.6 dB and −51.9 dB at 10 Hz and 1 kHz, respectively. The LDO_5V, LDO_3V, and LDO_1.5V generate regulated output dc voltages of 5 V, 3 V, and 1.5 V, respectively, with dc load regulations of 0.43 mV/mA, 0.70 mV/mA, and 0.28 mV/mA while delivering load currents of 300 mA, 100 mA, and 100 mA, respectively.Keywords
Funding Information
- the Korea Government(MOTIE) (P0012451)
This publication has 26 references indexed in Scilit:
- A Triple-Mode Wireless Power-Receiving Unit With 85.5% System Efficiency for A4WP, WPC, and PMA ApplicationsIEEE Transactions on Power Electronics, 2017
- A Novel Technique for Compact Size Wireless Power Transfer Applications Using Defected Ground StructuresIEEE Transactions on Microwave Theory and Techniques, 2016
- A Single-Stage Low-Dropout Regulator With a Wide Dynamic Range for Generic ApplicationsIEEE Transactions on Very Large Scale Integration (VLSI) Systems, 2015
- A Design of a Wireless Power Receiving Unit With a High-Efficiency 6.78-MHz Active Rectifier Using Shared DLLs for Magnetic-Resonant A4 WP ApplicationsIEEE Transactions on Power Electronics, 2015
- An Area-Efficient Current-Mode Bandgap Reference With Intrinsic Robust Start-Up BehaviorIEEE Transactions on Circuits and Systems II: Express Briefs, 2015
- Inductively coupled power transfer (ICPT) for electric vehicle charging – A reviewRenewable and Sustainable Energy Reviews, 2015
- A 0.13-$\mu{\rm m}$ CMOS Low-Power Capacitor-Less LDO Regulator Using Bulk-Modulation TechniqueIEEE Transactions on Circuits and Systems I: Regular Papers, 2014
- Introduction to the alliance for wireless power loosely-coupled wireless power transfer system specification version 1.02013
- A Sub-1-V, 10 ppm/ $^{\circ}$C, Nanopower Voltage Reference GeneratorIEEE Journal of Solid-State Circuits, 2007
- Design and analysis of an adaptive transcutaneous power telemetry for biomedical implantsIEEE Transactions on Circuits and Systems I: Regular Papers, 2005