SSSyed Adil Ali Shah

Syed Adil Ali Shah

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Syed Adil Ali Shah has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Design of a Power Regulated Circuit with Multiple LDOs for SoC Applications

    by Danial Khan, Muhammad Basim, Qurat Ul Ain, Syed Adil Ali Shah, Khuram Shehzad, Deeksha Verma, Kang-Yoon Lee

    In this paper, a power regulated circuit (PRC) is proposed for system-on-a-chip (SoC) applications. The proposed PRC is composed of a limiter, a bandgap reference (BGR), three low-dropout regulators (LDOs), and a bias generator. A high output voltage of an active rectifier is given to the limiter, which limits it to a desired supply voltage for circuits in PRC. The curvature-compensated BGR robust to process, voltage and temperature (PVT) variations are designed to provide a stable reference voltage for three LDOs. The three LDOs are implemented to generate regulated output dc voltages. The proposed PRC is designed and fabricated in 130 nm bipolar-CMOS-DMOS (BCD) technology with die area of 1.9 mm × 0.860 mm, including pads. The measurement results show that the limiter limits the input voltage of (6 V to 20 V) to 5.3 V. The BGR produces a stable reference voltage of 1.24 V with a power supply rejection ratio (PSRR) of −58.6 dB and −51.9 dB at 10 Hz and 1 kHz, respectively. The LDO_5V, LDO_3V, and LDO_1.5V generate regulated output dc voltages of 5 V, 3 V, and 1.5 V, respectively, with dc load regulations of 0.43 mV/mA, 0.70 mV/mA, and 0.28 mV/mA while delivering load currents of 300 mA, 100 mA, and 100 mA, respectively.


  • Open Access

    A Highly Efficient RF-DC Converter for Energy Harvesting Applications Using a Threshold Voltage Cancellation Scheme

    by Muhammad Basim, Danial Khan, Qurat Ul Ain, Khuram Shehzad, Syed Adil Ali Shah, Byeong-Gi Jang, Young-Gun Pu, Joon-Mo Yoo, Joon-Tae Kim, Kang-Yoon Lee

    In this paper, a self-threshold voltage (Vth) compensated Radio Frequency to Direct Current (RF-DC) converter operating at 900 MHz and 2.4 GHz is proposed for RF energy harvesting applications. The threshold voltage of the rectifying devices is compensated by the bias voltage generated by the auxiliary transistors and output DC voltage. The auxiliary transistors compensate the threshold voltage (Vth) of the PMOS rectifying device while the threshold voltage (Vth) of the NMOS rectifying device is compensated by the output DC voltage. The proposed RF-DC converter was implemented in 180 nm Complementary Metal-Oxide Semiconductor (CMOS) technology. The experimental results show that the proposed design achieves better performance at both 900 MHz and 2.4 GHz frequencies in terms of PCE, output voltage, sensitivity, and effective area. The peak power conversion efficiency (PCE) of 38.5% at −12 dBm across a 1 MΩ load for 900 MHz frequency was achieved. Similarly, for 2.4 GHz frequency, the proposed circuit achieves a peak PCE of 26.5% at −6 dBm across a 1 MΩ load. The proposed RF-DC converter circuit shows a sensitivity of −20 dBm across a 1 MΩ load and produces a 1 V output DC voltage.


  • Open Access

    A Design of Ambient RF Energy Harvester with Sensitivity of −21 dBm and Power Efficiency of a 39.3% Using Internal Threshold Voltage Compensation

    by Danial Khan, Hamed Abbasizadeh, Sang-Yun Kim, Zaffar Hayat Nawaz Khan, Syed Adil Ali Shah, Young Gun Pu, Keum Cheol Hwang, Youngoo Yang, Minjae Lee, Kang-Yoon Lee

    In this paper, a low-power reconfigurable ambient Radio Frequency to Direct Current power (RF–DC) converter using an internal threshold voltage cancellation (IVC) scheme with an auxiliary transistors block is presented. A maximum power point tracking (MPPT) algorithm is implemented in order to maintain the high efficiency by automatically selecting the number of stages. The proposed reconfigurable converter efficiently converts the RF signals to DC voltage by dynamically controlling the threshold voltage of the forward and reversed-biased transistors in the primary rectification body. During positive half-cycle, the proposed RF–DC converter reduces the voltage drop across the forward-biased transistors, which results in increased harvested power and output DC voltage. During negative half cycle, the proposed rectifier minimizes the reverse leakage current and prevents the loss of energy stored in the prior stages. A five-stage internal threshold compensated power converter is designed in 0.18 µm Complementary Metal-Oxide-Semiconductor (CMOS) technology with an active die area of 360 µm × 160 µm, while the Maximum Power Point Tracking (MPPT) occupies an active die area of 730 µm × 280 µm. The proposed scheme obtains maximum post-simulated power conversion efficiency (PCE) of 39.3% when input power level is −15 dBm and produces an output voltage of 3.3 V for a load of 1 MΩ and at a frequency of 900 MHz. The proposed scheme achieves a voltage sensitivity of 1V at a remarkably low input power of −21 dBm for a 1 MΩ load.


  • Open Access

    Single Inductor-Multiple Output DPWM DC-DC Boost Converter with a High Efficiency and Small Area

    by Young Jun Park, Zaffar Hayat Nawaz Khan, Seong Jin Oh, Byeong Gi Jang, Nabeel Ahmad, Danial Khan, Hamed Abbasizadeh, Syed Adil Ali Shah, Young Gun Pu, Keum Cheol Hwang, et al.

    In this paper, a small-area and high-efficiency single-inductor multiple output (SIMO) boost converter with digital pulse-width modulation (DPWM) is proposed. The DPWM comprises a delay line using interlaced hysteresis delay cells (IHDCs) that occupy a small area while consuming a low power amount. These proposed IHDCs are applied to replace the conventional delay cells of the prior works for both the power and area reductions. Regarding the DC-DC converter, this technique comprises fewer digital blocks in the feedback path compared with the conventional DC-DC converter, and the DPWM architecture uses IHDCs. The purpose of the digital limiter block is to concede some helpful code for the DPWM. The IHDC topology used for delay in DPWM is of the simplest architecture. The high-side power switch gate drivers need individual phases which are generated by phase control. The Complementary Metal Oxide Semiconductor (CMOS)-fabrication process is 55 nm, with a standard supply voltage of 1.8 V and outputs of 2.2 and 2.4 V. The chip area is approximately 170 × 190 µm and its efficiency is 94.4%.