Repetitive model predictive control for load alleviation on a research wind turbine using trailing edge flaps
Authors:
Open Access
- 12 April 2022
- journal article
- research article
- Published by Wiley in Wind Energy
- Vol. 25 (7) , 1290-1308
Abstract
Summary: This paper presents the results of an advanced control strategy that employs active trailing edge flaps to reduce the fatigue loads of an experimental wind turbine. The strategy, called repetitive model predictive control, is a multiple‐input multiple‐output controller that aims at the alleviation of out‐of‐plane blade root bending moments. The strategy incorporates the control commands, output errors, and state deviation from the previous rotation. This way, the time lag in the strain sensor input due to the blade inertia is compensated. Additionally, a strategy to limit the computational costs is presented. The load alleviation performance is evaluated at different yaw cases and compared with different individual flap control strategies. The repetitive model predictive control is able to reduce the fatigue loads by up to 23% compared with the better performing individual flap control strategy. This improvement in load reduction is accompanied by an increase in flap travel of up to 7% compared with the individual flap control strategies.Keywords
This publication has 22 references indexed in Scilit:
- Turbulent wind field characterization and re-generation based on pitot tube measurements mounted on a wind turbine2015
- Load monitoring for active control of wind turbinesRenewable and Sustainable Energy Reviews, 2015
- Comparison of individual pitch and smart rotor control strategies for load reductionJournal of Physics: Conference Series, 2014
- A smart rotor configuration with linear quadratic control of adaptive trailing edge flaps for active load alleviationWind Energy, 2014
- Closed‐loop subspace identification methods: an overviewIET Control Theory & Applications, 2013
- Aeroelastic instability problems for wind turbinesWind Energy, 2007
- The role of vector autoregressive modeling in predictor-based subspace identificationAutomatica, 2007
- Further load reductions with individual pitch controlWind Energy, 2005
- Consistency analysis of some closed-loop subspace identification methodsAutomatica, 2005
- Generalized binary noise test-signal concept for improved identification-experiment designAutomatica, 1990