Estimation of Tensile and Compression Properties of 2D Woven Jute and Kevlar Hybrid Laminate
Authors:
Open Access
- 1 December 2020
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 988 (1) , 012103
Abstract
In this study, the mechanical properties of a 2D woven novel hybrid laminate containing jute in the warp direction and Kevlar in the weft direction as reinforcement material is compared with four different weaving patterns. The hybrid laminates were tested for its tensile strength, elongation percentage and compressive strength. The results show that under the condition of identical composition of the matrix element, similarity in the thickness of the laminates and same stacking sequences, the weaving patterns exhibit profound influence on the tensile and compressive properties. The plain weaving pattern exhibited lowest tensile strength and compressive strength while the highest values for the two properties was observed from the hybrid laminate having twill weave pattern.Keywords
This publication has 20 references indexed in Scilit:
- 3D printing of polymer matrix composites: A review and prospectiveComposites Part B: Engineering, 2017
- Low velocity impact response of 3D angle-interlock Kevlar/basalt reinforced polypropylene compositesMaterials & Design, 2016
- Collapse of 3D orthogonal woven carbon fibre composites under in-plane tension/compression and out-of-plane bendingComposite Structures, 2016
- Pultruded Kenaf Fibre Reinforced Composites: Effect of Different Kenaf Fibre Yarn TexProcedia Chemistry, 2016
- Influence of Lay-up Configuration and Feed Rate on Surface Integrity when Drilling Carbon Fibre Reinforced Plastic (CFRP) CompositesProcedia CIRP, 2014
- Influence of stacking sequence on mechanical properties of basalt-jute fiber-reinforced polymer hybrid compositesJournal of Polymer Engineering, 2012
- Surface treatments of jute fabric: The influence of surface characteristics on jute fabrics and mechanical properties of jute/polyester compositesIndustrial Crops and Products, 2012
- Resin transfer molding of hemp fiber composites: optimization of the process and mechanical properties of the materialsComposites Science and Technology, 2006
- Effect of Stacking Sequence on the Properties of Plain-Satin Hybrid Laminate CompositesPolymer-Plastics Technology and Engineering, 2003
- Stiffness and strength behaviour of woven fabric compositesJournal of Materials Science, 1982