Static and Dynamic Friction of Pure and Friction-Modified PA6 Polymers in Contact with Steel Surfaces: Influence of Surface Roughness and Environmental Conditions
Open Access
- 16 February 2019
- journal article
- research article
- Published by MDPI AG in Lubricants
- Vol. 7 (2) , 17
Abstract
In the present study, PA6 polymers with and without solid lubricant inclusions were investigated against S1100QL steel surfaces that had different surface roughness values—a very high surface roughness (Rz ≈ 40 µm) and a low surface roughness (Rz ≈ 5 µm). Static and dynamic friction coefficients were analysed under a series of nominal contact pressures (2.5 to 40 N/mm2) considering the influences of polymer water saturation, temperature, counter-body surface roughness and lubrication. Mechanisms for the observed influences of the respective parameters are provided and are interpreted from the view of the adhesive and deformative contributions to the friction force.Keywords
Funding Information
- Austrian COMET Programme (Project XTribology no. 849109)
This publication has 7 references indexed in Scilit:
- Handbook of Polymer Tribology2017
- Tribological and Mechanical Behaviors of Polyamide 6/Glass Fiber Composite Filled with Various Solid LubricantsThe Scientific World Journal, 2013
- Influence of counterface roughness on friction properties of engineering plastics for bearing applicationsMaterials & Design (1980-2015), 2009
- Polymer Tribology2009
- Designing with Plastics2006
- Tribology of polymers: Adhesion, friction, wear, and mass-transferTribology International, 2005
- A review of the influence of environmental humidity and water on friction, lubrication and wearTribology International, 1990