Removal of Iron from Leached Geological Samples Using Polypropylene Waste Amidoxime-Based Radiation Grafted Adsorbent
Authors:
- Hafiz Zain Ul AabidinHAHafiz Zain Ul Aabidin
- Muhammad Inam Ul HassanMHMuhammad Inam Ul Hassan
- Tariq YasinTYTariq Yasin
- Muhammad Zubair RahimMRMuhammad Zubair Rahim
- Asif RazaARAsif Raza
- 1 January 2025
- journal article
- Published by Tech Science Press in Journal of Polymer Materials
- Vol. 42 (1) , 141-150
Abstract
Geological samples often contain significant amounts of iron, which, although not typically the target element, can substantially interfere with the analysis of other elements of interest. To mitigate these interferences, amidoxime-based radiation grafted adsorbents have been identified as effective for iron removal. In this study, an amidoxime-functionalized, radiation-grafted adsorbent synthesized from polypropylene waste (PPw-g-AO-10) was employed to remove iron from leached geological samples. The adsorption process was systematically optimized by investigating the effects of pH, contact time, adsorbent dosage, and initial ferric ion concentration. Under optimal conditions—pH 1.4, a contact time of 90 min, and an initial ferric ion concentration of 4500 mg/L—the adsorbent exhibited a maximum iron adsorption capacity of 269.02 mg/g. After optimizing the critical adsorption parameters, the adsorbent was applied to the leached geological samples, achieving a 91% removal of the iron content. The adsorbent was regenerated through two consecutive cycles using 0.2 N HNO3, achieving a regeneration efficiency of 65%. These findings confirm the efficacy of the synthesized PPw-g-AO-10 as a cost-effective and eco-friendly adsorbent for successfully removing iron from leached geological matrices while maintaining a reasonable degree of reusability.Keywords
This publication has 20 references indexed in Scilit:
- State of the art in recycling waste thermoplastics and thermosets and their applications in constructionResources, Conservation and Recycling, 2021
- Synthesis of Sawdust‐based Poly(amidoxime) Ligand for Heavy Metals Removal from WastewaterChemistrySelect, 2019
- Upcycling of polypropylene waste by surface modification using radiation-induced graftingApplied Surface Science, 2017
- Removal of copper using novel amidoxime based chelating nanohybrid adsorbentEuropean Polymer Journal, 2017
- Studies on adsorption behavior of an industrial waste for removal of chromium from aqueous solutionSouth African Journal of Chemical Engineering, 2017
- Comparative study of the application of chelating resins for rare earth recoveryHydrometallurgy, 2017
- Removal of iron from industrial grade aluminum sulfate by primary amine extraction systemHydrometallurgy, 2011
- Chelating Resins and Their Applications in the Analysis of Trace Metal IonsMicrochemical Journal, 1999
- Characterization and applications of chelating resins as chemical reagents for metal ions, based on the Gibbs-Donnan modelReactive and Functional Polymers, 1998
- The removal of iron from aluminum chloride leach liquors by ion exchangeHydrometallurgy, 1985