Bistability-enhanced elastocaloric cooling device based on a natural rubber foil
Open Access
- 22 October 2024
- journal article
- research article
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 136 (16)
Abstract
A novel solid-state elastocaloric cooling device is presented, making use of a bistable actuation mechanism for loading of a natural rubber (NR) foil refrigerant. The thicknesses of the foil refrigerants are 290 and 650 μm in an initial undeformed state, while their lateral size is 9 × 26.5 mm2. Owing to the large surface-to-volume ratio of the NR foils, heat transfer to the heat sink and source is accomplished by a solid–solid mechanical contact. The loading mechanism consists of a rotating lever arm providing for stable positions at contact to the heat sink and source, which allows for significant power saving during elastocaloric cycling. In addition, the negative biasing associated with bistability favors good thermal contact at the end positions, which improves heat transfer resulting in a maximum temperature span ΔTdevice of 4.2 K in the strain range of 300%–700% under adiabatic conditions. The coefficient of performance of the device COPdevice reaches values up to 5.7 for foil refrigerants of 290 μm thickness. The maximum cooling power is 214 mW corresponding to a specific cooling power of 3.4 Wg−1.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (Ko2953/16-1)
This publication has 33 references indexed in Scilit:
- Giant temperature span and cooling power in elastocaloric regeneratorJoule, 2023
- High-performance polymer-based regenerative elastocaloric coolerApplied Thermal Engineering, 2023
- High-performance cooling and heat pumping based on fatigue-resistant elastocaloric effect in compressionJoule, 2022
- Elastocaloric Cooling on the Miniature Scale: A Review on Materials and Device EngineeringEnergy Technology, 2018
- Comparison of elastocaloric effect of natural rubber with other caloric effects on different-scale cooling application casesApplied Thermal Engineering, 2017
- Evolution of temperature profiles in TiNi films for elastocaloric coolingActa Materialia, 2014
- Elastocaloric modeling of natural rubberApplied Thermal Engineering, 2013
- A review on the Mullins effectEuropean Polymer Journal, 2009
- Phase-Transformation Fronts Evolution for Stress- and Strain-Controlled Tension Tests in TiNi Shape Memory AlloyExperimental Mechanics, 2006
- Die kalorimetrische Erfassung der Dehnungskristallisation PolymererColloid and Polymer Science, 1970