Effect of heat input on the mechanical properties of welded joints in high-strength steels
Authors:
- 27 April 2015
- journal article
- research article
- Published by Taylor & Francis in Welding International
- Vol. 30 (2) , 129-132
Abstract
Experiments were carried out to determine the properties of the welded joints in 8 mm thick high-strength steels produced by quenching and tempering and thermomechanical rolling with accelerated cooling (tensile strength 821–835 MPa). The dependence of the strength, elongation, hardness, impact energy and crack opening displacement on the heat input in the range 1.0–0.7 kJ mm− 1 was determined. The results show that the dependence of the strength of the welded joints decreases and that of the elongation increases. The heat input has only a slight effect on the impact energy and crack opening displacement in the heat-affected zone.Keywords
This publication has 10 references indexed in Scilit:
- Effect of weld thermal cycle on microstructure and fracture toughness of simulated heat-affected zone for a 800MPa grade high strength low alloy steelJournal of Materials Processing Technology, 2008
- Microstructures and Properties in Simulated Heat-Affected Zones of 685 MPa Grade Copper-Bearing SteelJournal of Iron and Steel Research International, 2007
- Heat treatment in two phase region and its effect on microstructure and mechanical strength after welding of a low carbon steelMaterials & Design (1980-2015), 2007
- Control of strength and toughness at the heat affected zoneWelding International, 2003
- Effect of heat input on plastic deformation of undermatched weldsJournal of Materials Processing Technology, 2002
- The Effect of Vanadium and Niobium on the Properties and Microstructure of the Intercritically Reheated Coarse Grained Heat Affected Zone in Low Carbon Microalloyed Steels.ISIJ International, 2001
- Microstructure of martensite–austenite constituents in heat affected zones of high strength low alloy steel welds in relation to toughness propertiesScience and Technology of Welding and Joining, 2000
- Weld HAZ embrittlement of Nb containing C–Mn steelsInternational Journal of Pressure Vessels and Piping, 1998
- Effects of weld strength undermatch on fracture toughness of HAZ notched weldments in a HSLA steelInternational Journal of Fracture, 1998
- Cracking and fracture in welds1992