An Analytical Model for Capacitive Pressure Transducers With Circular Geometry
Authors:
- 7 May 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 27 (3) , 448-456
Abstract
This paper derives an analytical model of a capacitive pressure transducer based on equations for deflection and fundamental mode shape of a clamped circular plate. The derived model enables efficient large-signal electromechanical simulations and calculation of an equivalent circuit. The model shows good agreement with finite element analysis and experiments. The spring-mass-damper system used in the model is calculated for uniform, anisotropic, and layered plate materials. A cubic spring constant captures large plate deflections. Use of the clamped-plate shape function leads to a simple expression for capacitance as a function of deflection and to closed-form equations for pull-in voltage. Comparison of the model with finite element analysis for several air-coupled capacitive micromachined ultrasonic transducer designs shows better than 10% agreement for deflection, resonant frequency, and pull-in voltage. The model also compares well with characterized devices. The analytical model could be further improved with additional damping sources and methods to model a compliant plate boundary.Keywords
This publication has 22 references indexed in Scilit:
- A methodology and model for the pull-in parameters of electrostatic actuatorsJournal of Microelectromechanical Systems, 2001
- Extending the travel range of analog-tuned electrostatic actuatorsJournal of Microelectromechanical Systems, 1999
- Mechanical-thermal noise in micromachined acoustic and vibration sensorsIEEE Transactions on Electron Devices, 1993
- A new bulge test technique for the determination of Young's modulus and Poisson's ratio of thin filmsJournal of Materials Research, 1992
- Axisymmetric vibration of circular plates in contact with fluidJournal of Sound and Vibration, 1991
- Mechanical property measurements of thin films using load-deflection of composite rectangular membranesSensors and Actuators, 1989
- Piston radiator: Some extensions of the theoryThe Journal of the Acoustical Society of America, 1979
- Mutual Acoustic Impedance between Radiators in an Infinite Rigid PlaneThe Journal of the Acoustical Society of America, 1960
- THE BENDING OF THIN ANISOTROPIC PLATESQuarterly Journal of Mechanics and Applied Mathematics, 1952
- On the Frequency of Vibration of Circular DiaphragmsProceedings of the Physical Society of London, 1922