Preliminary tests for the application of an optical measurement system for the development of a kiln-drying schedule
Authors:
- 6 July 2015
- journal article
- research article
- Published by Taylor & Francis in Drying Technology
- Vol. 34 (4) , 483-490
Abstract
The drying defects of refractory species are known to begin occurring in the early stages of kiln drying. Therefore, monitoring the strain distribution in wood at these early stages of drying is expected to be helpful for the reduction of possible defect development. In this study, the strain distribution of red oak specimens was progressively monitored on the tangential surface of the wood using an optical measurement system based on the digital image correlation (DIC) principle. The specimens were kiln-dried with three different initial conditions. The strain distribution maps obtained at various moisture contents clearly illustrated the progress of the strain development in the wood. In addition, strain velocities and strain ratios were calculated from the data extracted from the strain distribution maps. These parameters could be used for developing or modifying a kiln-drying schedule of a refractory species.Keywords
Funding Information
- Korea Forest Service (S211414L010310)
This publication has 14 references indexed in Scilit:
- A Novel Method of Measuring Moisture Content Distribution in Timber During Drying Using CT Scanning and Image Processing TechniquesDrying Technology, 2012
- Non-contact Measurement of the Shrinkage and Calculation of Porosity During the Drying of BananaDrying Technology, 2011
- Applying digital image correlation to wood strands: Influence of loading rate and specimen thicknessHolzforschung, 2010
- Density and Moisture Profile Evolution during Timber Drying by CT Scanning MeasurementsDrying Technology, 2010
- Non-destructive Measurement of Moisture Distribution in Wood during Drying Using Digital X-ray MicroscopyDrying Technology, 2008
- Computer-Vision System for Control of Drying ProcessesDrying Technology, 2006
- FULL-FIELD DYNAMIC DISPLACEMENT AND STRAIN MEASUREMENT USING ADVANCED 3D IMAGE CORRELATION PHOTOGRAMMETRY: PART 1Experimental Techniques, 2003
- Submicron deformation field measurements: Part 2. Improved digital image correlationExperimental Mechanics, 1998
- Measurement of deformations on concrete subjected to compression using image correlationExperimental Mechanics, 1997
- Digital image correlation using Newton-Raphson method of partial differential correctionExperimental Mechanics, 1989