Spectroscopic Online Monitoring: Using a Multi-Track Visible Spectrometer to Facilitate a Mass Balance Study in a Simulated TALSPEAK Process
Open Access
- 20 March 2025
- journal article
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (12) , 11796-11805
Abstract
Nuclear energy is a promising low-carbon energy candidate to meet the increased demand for green energy, where the integration of fuel recycling can have significant benefits for material usage and waste reduction. Utilizing in situ monitoring tools can provide ample opportunities to better control and safeguard nuclear material recycle processes while also offering knowledge and insight into real-time solution properties. The simultaneous measurement of analytical targets in multiple process locations can enable real-time mass balance and material accountancy calculations. This is demonstrated here with a mass balance study of Nd3+ on countercurrent aqueous/organic metal extraction within a single centrifugal contactor. The Nd3+ concentration was simultaneously monitored at the inlets and outlets of both aqueous and organic phases using a visible absorbance detector that allowed for the simultaneous measurement of up to six locations. The Nd3+ concentration was calculated by using chemical data science algorithms, where model training sets were collected on a single track of the detector. The discussion includes addressing the challenges of using a model collected on a single track and applying it as a model across the other tracks on the detector. Each track of the detector corresponds to one measurement location on the contactor. The difference in the integrated moles of Nd3+ between the inlet and outlet at the end of the experiment was near zero, indicating that the mass balance of this experiment was maintained. Overall, the online spectroscopic monitoring was able to follow changing solution conditions and accurately measure the concentration of Nd3+ in different locations within the contactor system.Keywords
Funding Information
- Office of Defense Nuclear Nonproliferation
This publication has 33 references indexed in Scilit:
- Are standard sample measurements still needed to transfer multivariate calibration models between near-infrared spectrometers? The answer is not alwaysTrAC Trends in Analytical Chemistry, 2021
- Calibration transfer for bioprocess Raman monitoring using Kennard Stone piecewise direct standardization and multivariate algorithmsEngineering Reports, 2020
- Review of on-line and near real-time spectroscopic monitoring of processes relevant to nuclear material managementAnalytica Chimica Acta, 2020
- Combinations of NIR, Raman spectroscopy and physicochemical measurements for improved monitoring of solvent extraction processes using hierarchical multivariate analysis modelsAnalytica Chimica Acta, 2018
- A Calibration Model Maintenance RoadmapIFAC-PapersOnLine, 2015
- Transfer of multivariate calibration models: a reviewChemometrics and Intelligent Laboratory Systems, 2002
- Improvement of the piecewise direct standardisation procedure for the transfer of NIR spectra for multivariate calibrationChemometrics and Intelligent Laboratory Systems, 1996
- Standardization of Near-Infrared Spectrometric InstrumentsAnalytical Chemistry, 1996
- The Nuclear Fuel Cycle1995
- Multivariate calibration standardizationChemometrics and Intelligent Laboratory Systems, 1994