An in vitro evaluation of the effect of polishing on the stainability of different CAD/CAM ceramic materials
Authors:
Open Access
- 1 March 2020
- journal article
- research article
- Published by Springer Nature in The Saudi Dental Journal
- Vol. 32 (3) , 135-141
Abstract
To determine the effect of coffee on the stainability of CAD/CAM ceramics after different surface treatment protocols. Ninety specimens (2 mm × 10 mm) of CAD/CAM ceramic materials (Vitablocs Mark II, VITA Enamic, and VITA Suprinity) were prepared. The specimens were subdivided (n = 10) into three groups: G1: Glazed (control group), G2: Subjected to finishing and polishing, and G3: Re-glazed after finishing and polishing. The surface treatment was performed using a diamond polishing system for porcelain (Diapol) followed by applying a diamond polishing paste (Diapolisher). The specimens were immersed in distilled water for 24 h, and the baseline color measurement after finishing and polishing was recorded. Each group was then immersed in a staining solution (coffee) for one week, and the second color measurement was recorded. The color of the CAD/CAM ceramic materials in the finishing and polishing groups changed significantly after staining (P < 0.05). Statistically significant differences were noticed after staining in the polished groups of Vita Enamic and Vita Suprinity compared with the glazed group (control). However, the color change between the re-glazed and control groups was insignificant for all the materials (P > 0.05). Although the color change values of the three CAD/CAM materials increased, these changes were within the clinically acceptable value (ΔE < 3.3). Staining of the tested CAD/CAM ceramic materials increased the color change values within the clinically acceptable range in all the groups, with the highest values found after finishing and polishing. Re-glazing is recommended after surface adjustment for all the tested materials to increase their resistance to staining.Keywords
Funding Information
- College of Dentistry Research Center
- Deanship of Scientific Research at King Saud University (URSP-4-19-95)
This publication has 45 references indexed in Scilit:
- Color and Luminescence Stability of Selected Dental Materials In VitroJournal of Prosthodontics, 2012
- Ceramic materials in dentistry: historical evolution and current practiceAustralian Dental Journal, 2011
- Performance of Different Polishing Techniques for Direct CAD/CAM Ceramic RestorationsOperative Dentistry, 2010
- Effects of Six Surface Treatment Methods on the Surface Roughness of a Low‐Fusing and an Ultra Low‐Fusing Feldspathic Ceramic MaterialJournal of Prosthodontics, 2009
- Color Stability of Glazed and Polished Dental PorcelainsJournal of Prosthodontics, 2007
- Influence of the Finishing Technique on Surface Roughness of Dental Porcelains with Different MicrostructuresOperative Dentistry, 2006
- The effects of porcelain polishing systems on the color and surface texture of feldspathic porcelainThe Journal of Prosthetic Dentistry, 2006
- Influence of window size in small-window colour measurement, particularly of teethPhysics in Medicine & Biology, 1994
- A comparison of new and conventional methods for quantification of tooth colorThe Journal of Prosthetic Dentistry, 1990
- S uren des Kaffees XI. Anteil einzelner S uren an der titrierbaren Gesamts ureEuropean Food Research and Technology, 1985