Structure-Inhibition Relationship of Vapor-Deposited Alkylsilane Monolayers in Area-Selective Atomic Layer Deposition
- 22 July 2026
- journal article
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (30) , 22128-22136
Abstract
Area-selective atomic layer deposition (AS-ALD) relies critically on molecular-scale inhibition layers to suppress precursor adsorption in nongrowth regions. Although octadecyltrichlorosilane (ODTS) self-assembled monolayers (SAMs) are widely used, their structural parameters─particularly molecular orientation and grafted molecular areal density─have rarely been systematically correlated with inhibition performance. Moreover, conventional solution-phase deposition introduces contamination risks and extended processing times, limiting practical adoption. Here, we demonstrate a rapid vapor-phase deposition route that forms ODTS blocking layers with improved molecular alignment on SiO2 within 3 min. Angle-dependent near-edge X-ray absorption fine structure (NEXAFS) spectroscopy reveals a reduced molecular tilt angle of ∼29.8 ± 0.3° for vapor-deposited ODTS compared to ∼38.7 ± 0.6° for solution-deposited films, indicating a more upright average molecular orientation and lower orientational disorder. Molecular dynamics simulations establish an inverse correlation between tilt angle and grafted molecular areal density, yielding an estimated density of ∼2 molecules/nm2 for vapor-deposited layers. When applied as ALD inhibitors, the vapor-deposited ODTS layers exhibit improved blocking behavior for HfO2 and Ru ALD compared with the solution-deposited ODTS layers prepared in this study. For HfO2 ALD, image-based analysis at the same projected area fraction shows a ∼35% decrease in nucleation density on D-ODTS, while Ru nucleation is strongly suppressed on D-ODTS, with only isolated nuclei observed within the examined field of view. These results indicate that average molecular orientation and effective grafted molecular areal density are correlated with precursor-accessible nucleation pathways and ALD inhibition efficiency.Keywords
Funding Information
- Samsung Advanced Institute of Technology (IO231025-07501-01)
- Ministry of Science, ICT and Future Planning (NA)
- National Research Foundation of Korea (RS-2023-00210865)
- National Research Foundation of Korea (RS-2024-00433138)
This publication has 28 references indexed in Scilit:
- Area selective deposition for bottom-up atomic-scale manufacturingInternational Journal of Machine Tools and Manufacture, 2024
- Blocking mechanisms in area-selective ALD by small molecule inhibitors of different sizes: Steric shielding versus chemical passivationApplied Surface Science, 2024
- Area-selective atomic layer deposition (AS-ALD) of low temperature (300 °C) cobalt thin film using octadecyltrichlorosilane (ODTS) self-assembled monolayers (SAMs)Applied Surface Science, 2024
- Selection Criteria for Small-Molecule Inhibitors in Area-Selective Atomic Layer Deposition: Fundamental Surface Chemistry ConsiderationsAccounts of Chemical Research, 2023
- LAMMPS - a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scalesComputer Physics Communications, 2022
- Area-Selective Atomic Layer Deposition of TiN Using Aromatic Inhibitor Molecules for Metal/Dielectric SelectivityChemistry of Materials, 2020
- Area-Selective Deposition: Fundamentals, Applications, and Future OutlookChemistry of Materials, 2020
- Mechanism of Precursor Blocking by Acetylacetone Inhibitor Molecules during Area-Selective Atomic Layer Deposition of SiO2Chemistry of Materials, 2020
- From the Bottom-Up: Toward Area-Selective Atomic Layer Deposition with High SelectivityChemistry of Materials, 2018
- Force field for computation of conformational energies, structures, and vibrational frequencies of aromatic polyestersJournal of Computational Chemistry, 1994