ESEunji Sim

Eunji Sim

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Eunji Sim has a total of 58 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Preferential Ga Oxidation and a Depth-Dependent Oxidation Profile in GaTe

    by Eunji Sim, Thi Hoa Vu, Sunglae Cho, Seong Chu Lim, Kyuwook Ihm

    In layered GaTe, major electronic reconstruction is initiated by Ga-O formation rather than by direct oxidation of the Te-terminated surface. Here, we employ synchrotron-based in situ X-ray photoelectron spectroscopy (XPS) under controlled O2 exposure to characterize the chemical and electronic evolution of GaTe surfaces. We identify two oxidation regimes: rapid initial oxygen uptake dominated by Ga–O formation, followed by slower continued oxide growth, during which Te oxide-related features first become detectable at 5,400 L. Valence-band spectra show a sharp suppression of Te 5p-derived states near the valence band maximum, consistent with disruption of Ga-Te-hybridized states following Ga-O formation, before distinct Te oxide-related features become detectable. Depth-resolved Ga 3d measurements further reveal a surface-enriched Ga-oxidation profile, with oxygen-containing Ga states enhanced under more surface-sensitive conditions. These results suggest that effective passivation should limit oxygen access to Ga sites beneath the Te-terminated surface, rather than relying solely on coverage of the outermost Te layer. The exposure thresholds and depth-dependent oxidation profiles reported here provide quantitative benchmarks for this requirement.

  • Structure-Inhibition Relationship of Vapor-Deposited Alkylsilane Monolayers in Area-Selective Atomic Layer Deposition

    by Eunji Sim, Jungsub Lee, Somang Koo, Hongdeok Kim, Suk Gyu Hahm, Myongjong Kwon, Joonmyung Choi, Byungha Park, Kyuwook Ihm

    Area-selective atomic layer deposition (AS-ALD) relies critically on molecular-scale inhibition layers to suppress precursor adsorption in nongrowth regions. Although octadecyltrichlorosilane (ODTS) self-assembled monolayers (SAMs) are widely used, their structural parameters─particularly molecular orientation and grafted molecular areal density─have rarely been systematically correlated with inhibition performance. Moreover, conventional solution-phase deposition introduces contamination risks and extended processing times, limiting practical adoption. Here, we demonstrate a rapid vapor-phase deposition route that forms ODTS blocking layers with improved molecular alignment on SiO2 within 3 min. Angle-dependent near-edge X-ray absorption fine structure (NEXAFS) spectroscopy reveals a reduced molecular tilt angle of ∼29.8 ± 0.3° for vapor-deposited ODTS compared to ∼38.7 ± 0.6° for solution-deposited films, indicating a more upright average molecular orientation and lower orientational disorder. Molecular dynamics simulations establish an inverse correlation between tilt angle and grafted molecular areal density, yielding an estimated density of ∼2 molecules/nm2 for vapor-deposited layers. When applied as ALD inhibitors, the vapor-deposited ODTS layers exhibit improved blocking behavior for HfO2 and Ru ALD compared with the solution-deposited ODTS layers prepared in this study. For HfO2 ALD, image-based analysis at the same projected area fraction shows a ∼35% decrease in nucleation density on D-ODTS, while Ru nucleation is strongly suppressed on D-ODTS, with only isolated nuclei observed within the examined field of view. These results indicate that average molecular orientation and effective grafted molecular areal density are correlated with precursor-accessible nucleation pathways and ALD inhibition efficiency.

  • Open Access

    Conflicting entropy-driven zwitterionic dry polymer electrolytes for scalable high-energy all-solid-state batteries

    by Kyeong-Seok Oh, Ji Eun Lee, Jong Chan Shin, Dokyung Kim, Won-Yeong Kim, Imanuel Kristanto, Dong-Yeob Han, Soohyoung Lee, Eun Ji Shim, Seong-Hun Lee, et al.

    Inorganic electrolytes dominate all-solid-state batteries (ASSBs), but face critical limitations, including interfacial instability, complex manufacturing, and challenges in operating under commercially viable conditions. Here, we present a transformative approach using zwitterionic dry polymer electrolytes (ZPEs) designed via a conflicting entropy strategy to enable scalable energy-dense ASSBs. Guided by Flory–Huggins theory, liquid-state zwitterionic monomers exhibit higher mixing entropy with Li salts compared to conventional long-chain polymers, forming homogeneous monomer/salt mixtures with enhanced intermolecular electrostatic interactions to promote salt dissociation. In situ polymerization of these mixtures yields directionally aligned ion channels decoupled from the polymer backbone, characterized by reduced conformational entropy, allowing rapid Li⁺ migration via an ion-hopping mechanism under ambient conditions. The ZPEs are seamlessly incorporated as a solid catholyte into pre-fabricated high-areal-capacity (10.0 mAh cm⁻²) LiNi0.8Co0.1Mn0.1O2 positive electrodes, ensuring compatibility with existing cell manufacturing processes and has the potential to reduce production complexity and cost. Paired with thin Li-metal negative electrodes (N/P (negative-to-positive electrode capacity) ratio = 1.0), pouch-type ASSB full cells demonstrate a specific energy and energy density of 516 Wh kg−1 and 1329 Wh L−1 (excluding the pouch packaging) and stable cycle life at practical operating conditions (25 °C and 0.5 MPa) in such a constrained cell configuration.


  • Open Access

    Direct Observation of Dry Etch‐Induced Selectivity Tailoring of Alkylate Inhibition Layer Using DMATMS Vapor

    by Eunji Sim, Ha Eun Cho, Somang Koo, Jin Gyu Kim, Sukgyu Hahm, Myongjong Kwon, Seonhye Hwang, Soyoung Lee, Byungha Park, Kyuwook Ihm

    Area‐selective deposition is a key method for enhancing precision in nanofabrication, particularly for next‐generation semiconductor devices. (N,N‐dimethylamino)trimethylsilane (DMATMS) is attracting increasing attention for its ability to form a selective inhibition layer on technologically important surfaces. However, direct observation of this molecular layer is challenging because of the limited analysis methods available for tracing the monolayer chemistry. This study employs in situ spectroscopy to investigate surface chemistry before and after dry etching, revealing the significant chemical forms influencing the reactivity of DMATMS vapor on both surfaces. Using absorption spectroscopy, the presence of ─OH groups on SiO2 and SiNx are traced. The adsorption reactivity of DMATMS is notably diminished on SiNx due to the exposure of surface NH species after the removal of ─OH groups through dry etching. Conversely, the oxygen‐rich SiO2 surface retains some ─OH groups, leading to no significant change in DMATMS adsorption strength. Tailoring surface ─OH groups through dry etching has minimal impact on SiO2 but significantly suppresses DMATMS adsorption on SiNx, leading to 92.2% selectivity in the subsequently deposited ruthenium (Ru) layer. These results provide a new direction toward increasing area selectivity by directly tracing and controlling the key surface molecules.

  • Origin of Oxidation Variations in Ambient-Stable β-InSe

    by Eunji Sim, Dongwook Kim, Thi Huong Nguyen, Jehan Kim, Ha Eun Cho, Somang Koo, Sunglae Cho, Ji Hoon Shim, Seong Chu Lim, Kyuwook Ihm

    Understanding and controlling the oxidation of layered materials remain critical issues in the final stages of their practical application in devices. Layered materials achieve a band gap by removing inversion symmetry. However, the oxidation process becomes complex, and the oxidation of these materials is not yet fully understood. As a representative example, InSe has attracted considerable attention due to its high charge mobility and Si-like band gap. However, conflicting observations such as oxidation by Se and In have been reported, including contrasting assessments of the oxidation susceptibility. In this study, we report in situ spectroscopy results detailing the origins of various oxidation pathways. We observed that at low defect densities the reduced reaction barrier of InSe due to Se vacancies leads to oxygen adsorption, while as defects increase, the lower electronegativity of In rises as a new pathway for oxidation. At low defect density, the bulk layer was more energetically favored for oxygen adsorption, allowing oxygen to diffuse to a depth sufficient to form pseudoheterojunctions and making the surface layer seemingly resistant to oxidation. Our results provide an answer to why the resulting diversity of optical responses is expected to increase as well as strategies to achieve gas stability.


  • Open Access

    Solid to Quasi-Liquid Phase Transition of Submonolayer Pentacene

    by Eunji Sim, Mihyun Yang, Ha Eun Cho, Somang Koo, Seong Chu Lim, Kyuwook Ihm

    Eunji Sim, Mihyun Yang, Ha Eun Cho, Somang Koo, Seong Chu Lim, and Kyuwook Ihm. Applied Science and Convergence Technology 2023;32:89-92. https://doi.org/10.5757/ASCT.2023.32.4.89

  • Occurrence of anionic redox with absence of full oxidation to Ru5+ in high-energy P2-type layered oxide cathode

    by Jinho Ahn, Hyunyoung Park, Wonseok Ko, Yongseok Lee, Jungmin Kang, Seokjin Lee, Sangyeop Lee, Eunji Sim, Kyuwook Ihm, Jihyun Hong, et al.


  • High-energy P2-type Na-layered oxide cathode with sequentially occurred anionic redox and suppressed phase transition

    by Sangyeop Lee, Jungmin Kang, Min-Kyung Cho, Hyunyoung Park, Wonseok Ko, Yongseok Lee, Jinho Ahn, Seokjin Lee, Eunji Sim, Kyuwook Ihm, et al.

    Although anionic-redox-based layered oxide materials have attracted great attention as promising cathodes for Na-ion batteries because of their high practical capacities, they suffer from undesirable structural degradation, resulting in the poor electrochemical behavior. Moreover, the occurrence of stable anionic-redox reaction without the use of expensive elements such as Li, Co, and Ni is considered one of the most important issues for high-energy and low-cost Na-ion batteries. Herein, using first-principles calculation and various experimental techniques, we investigate the combination of vacancy (□) and Ti4+ cations in the transition-metal sites to enable outstanding anionic-redox-based electrochemical performance in the Na-ion battery system. The presence of vacancies in the P2-type Na0.56[Ti0.1Mn0.76□0.14]O2 structure suppresses the large structural change such as the P2–OP4 phase transition, and Ti4+ cations in the structure result in selectively oxidized oxygen ions with structural stabilization during Na+ deintercalation in the high-voltage region. The high structural stability of P2-type Na0.56[Ti0.1Mn0.76□0.14]O2 enables not only the high specific capacity of 224.92 mAh g−1 at 13 mA g−1 (1C = 264.1 mA g−1) with an average potential of ∼2.62 V (vs Na+/Na) but also excellent cycle performance with a capacity retention of ∼80.38% after 200 cycles at 52 mA g−1 with high coulombic efficiencies above 99%. Although there are some issues such as low Na contents in the as-prepared state, these findings suggest potential strategies to stabilize the anionic-redox reaction and structure in layered-oxide cathodes for high-energy and low-cost Na-ion batteries.