Rotor Blade Heat Transfer of High Pressure Turbine Stage Under Inlet Hot-Streak and Swirl
Authors:
- 1 June 2015
- journal article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 137 (6) , 062601
Abstract
A key consideration in high pressure (HP) turbine designs is the heat load experienced by rotor blades. Impact of turbine inlet nonuniformity of combined temperature and velocity traverses, typical for a lean-burn combustor exit, has rarely been studied. For general turbine aerothermal designs, it is also of interest to understand how the behavior of lean-burn combustor traverses (with both hot-streak and swirl) might contrast with those for a rich-burn combustor (largely hot-streak only). In the present work, a computational study has been carried out on the aerothermal performance of a HP turbine stage under nonuniform temperature and velocity inlet profiles. The analyses are primarily conducted for two combined hot-streak and swirl inlets, with opposite swirl directions. In addition, comparisons are made against a hot-streak only case and a uniform inlet. The effects of three nozzle guide vane (NGV) shape configurations are investigated: straight, compound lean (CL) and reverse CL (RCL). The present results reveal a qualitative change in the roles played by heat transfer coefficient (HTC) and fluid driving (“adiabatic wall”) temperature, Taw. It has been shown that the blade heat load for a uniform inlet is dominated by HTC, whilst a hot-streak only case is largely influenced by Taw. However, in contrast to the hot-streak only case, a combined hot-streak and swirl case shows a role reversal with the HTC being a dominant factor. Additionally, it is seen that the swirling flow redistributes radially the hot fluid within the NGV passage considerably, leading to a much ‘flatter’ rotor inlet temperature profile compared to its hot-streak only counterpart. Furthermore, the rotor heat transfer characteristics for the combined traverses are shown to be strongly dependent on the NGV shaping and the inlet swirl direction, indicating a potential for further design space exploration. The present findings underline the need to clearly define relevant combustor exit temperature and velocity profiles when designing and optimizing NGVs for HP turbine aerothermal performance.Keywords
This publication has 17 references indexed in Scilit:
- Effect of Nozzle Guide Vane Lean Under Influence of Inlet Temperature TraverseJournal of Turbomachinery, 2013
- Analysis on the Effect of a Nonuniform Inlet Profile on Heat Transfer and Fluid Flow in Turbine StagesJournal of Turbomachinery, 2011
- Fourier methods for turbomachinery applicationsProgress in Aerospace Sciences, 2010
- Effect of Hot-Streak Counts on Turbine Blade Heat Load and ForcingJournal of Propulsion and Power, 2007
- An experimental study of reverse compound lean in a linear turbine cascadeProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2005
- The Design, Development and Testing of a Non-Uniform Inlet Temperature Generator for the QinetiQ Transient Turbine Research Facility2003
- Method of simulating unsteady turbomachinery flows with multiple perturbationsAIAA Journal, 1992
- Unsteady analysis of hot streak migration in a turbine stageJournal of Propulsion and Power, 1992
- The Influence of Blade Lean on Turbine LossesJournal of Turbomachinery, 1992
- Redistribution of an inlet temperature distortion in an axial flow turbine stageJournal of Propulsion and Power, 1989