Re-examining the Nicosia-Tomei robot observer-controller from a backstepping perspective
Authors:
- S.Y. LimSLS.Y. Lim
- D.M. DawsonDDD.M. Dawson
- 1 May 1996
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 4 (3) , 304-310
Abstract
Many robot controllers require not only link position measurements but also link velocity measurements; however, most robotic systems are only equipped with link position measurement devices. To address this problem, the authors present an observer-based controller for the link position tracking, output feedback control of robot manipulators. The approach is based on an observed integrator backstepping procedure which allows the authors to obtain a semi-global exponential stability result for the link position-velocity tracking error. Implementation of the proposed controller on a two-link direct-drive manipulator produces results which indicate good link position tracking performance and robustness against payload variations.Keywords
This publication has 15 references indexed in Scilit:
- Robust estimation and control of robotic manipulatorsRobotica, 1995
- A passivity approach to controller-observer design for robotsIEEE Transactions on Robotics and Automation, 1993
- Adaptive control of robot manipulators via velocity estimated feedbackIEEE Transactions on Automatic Control, 1992
- A variable structure robot control algorithm with an observerIEEE Transactions on Robotics and Automation, 1992
- Trajectory tracking in robot manipulators via nonlinear estimated state feedbackIEEE Transactions on Robotics and Automation, 1992
- Sliding observers for robot manipulatorsAutomatica, 1991
- Robust control of robotic manipulators without velocity feedbackInternational Journal of Robust and Nonlinear Control, 1991
- Robot control via robust estimated state feedbackIEEE Transactions on Automatic Control, 1991
- Computed torque control via a non‐linear observerInternational Journal of Adaptive Control and Signal Processing, 1990
- Robot control by using only joint position measurementsIEEE Transactions on Automatic Control, 1990