The effect of tempering temperature on pitting corrosion resistance of 420 stainless steels
Open Access
- 1 January 2016
- conference paper
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1725 (1) , 020005
Abstract
The AISI Type 420 stainless steels are commonly used to steam generators, mixer blades, etc. These stainless steels are most prone to pitting in dissolved Cl− containing environments. In this paper, the effect of tempering temperature on pitting corrosion resistance of AISI Type 420 stainless steels was studied. The AISI Type 420 stainless steels specimens were heat treated at the temperature of 1050°C for 1 hour to reach austenite stabilization and then quench in the oil. After that, the specimens were tempered at the temperature of 150, 250, 350 and 450°C for 30 minutes and then air cooled to the room temperature. The electrochemical potentiodynamic polarization test was conducted at 3.5% sodium chloride solution to evaluate corrosion rate and pitting corrosion behaviour. The Scanning Electron Microscope (SEM), Energy Dispersive X-Ray Spectroscopy (EDS) were used to evaluate the pitting corrosion product. The result have shown that highest pitting potential was found in the sample tempered at 250°C and corrosion pits were found to initiate preferentially around chromium carbides.Keywords
This publication has 5 references indexed in Scilit:
- Pitting corrosion resistance and bond strength of stainless steel overlay by friction surfacing on high strength low alloy steelDefence Technology, 2015
- Pitting corrosion of super martensitic stainless steel 00Cr13Ni5Mo2Anti-Corrosion Methods and Materials, 2014
- Corrosion and microstructural characterization of martensitic stainless steels submitted to industrial thermal processes for use in surgical toolsResearch on Biomedical Engineering, 2014
- Corrosion and Protection2004
- Influence of the heat treatment on the corrosion resistance of the martensitic stainless steel type AISI 420Journal of Materials Science Letters, 2003