Statistical analysis of porcelain tiles’ technical properties: full factorial design investigation on oxide ratios and temperature
Open Access
- 21 November 2023
- journal article
- research article
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (12) , 125953
Abstract
This study focuses on optimizing the composition and firing temperature of porcelain tiles using statistical analysis techniques. A full factorial design, including model adequacy checking, analysis of variance, Pareto charts, interaction plots, regression model, and response optimizer is employed. The key factors were the Seger ratios of SiO2/Al2O3, Na2O/K2O, MgO/CaO, and firing temperature. The response variables investigated were bulk density, water absorption, linear shrinkage, coefficient of thermal expansion (at 500 °C), and strength. The statistical analysis revealed highly significant results, which were further validated, confirming their reliability for practical use in the production of porcelain tiles. The study demonstrated the effectiveness of utilizing Seger formulas and properties of typical raw materials to accurately predict the final properties of ceramic tiles. By employing SiO2/Al2O3 = 5.2, Na2O/K2O = 1.50, MgO/CaO = 3.0, and firing temperature of 1180 °C, optimized properties, such as maximum strength, maximum bulk density, and minimum water absorption, was achieved with a composite desirability of 0.9821.Keywords
This publication has 53 references indexed in Scilit:
- Modelling the Influence of Manufacturing Process Variables on Dimensional Changes of Porcelain TilesAdvances in Materials Science and Engineering, 2013
- Optimization of Pb(II) adsorption onto modified walnut shells using factorial design and simplex methodologiesChemical Engineering Journal, 2011
- Effect of microstructure on mechanical properties of porcelain stonewareJournal of the European Ceramic Society, 2010
- Influence of composition on mechanical behaviour of porcelain tile. Part II: Mechanical properties and microscopic residual stressMaterials Science and Engineering: A, 2010
- Influence of composition on mechanical behaviour of porcelain tile. Part I: Microstructural characterization and developed phases after firingMaterials Science and Engineering: A, 2010
- Effect of quartz particle size on the mechanical behaviour of porcelain tile subjected to different cooling ratesJournal of the European Ceramic Society, 2009
- Characterisation of porcelain compositions using two china clays from CameroonCeramics International, 2007
- New body mixes for porcelain stoneware tiles with improved mechanical characteristicsJournal of the European Ceramic Society, 2007
- Artificial neural networks and neuro-fuzzy systems for modelling and controlling real systems: a comparative studyEngineering Applications of Artificial Intelligence, 2004
- Differences in densification behaviour of K- and Na-feldspar-containing porcelain bodiesThermochimica Acta, 2003