Microstructure and Microdeformation Effects on IGSCC of Alloy 600 Steam Generator Tubing
Authors:
- S. M. BruemmerSBS. M. Bruemmer
- L A. ChariotLCL A. Chariot
- C. H. HenagerCHC. H. Henager
- 1 November 1988
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 44 (11) , 782-788
Abstract
Microdeformation characteristics in alloy 600 tubing have been examined after various tensile deformations. Microstructure developed during processing was found to control subsequent microdeformation behavior. Grain boundary carbides were the most effective source of dislocations, activating at lower macrostrains and continuing to operate at higher macrostrains than other sources. Ledges within grain boundaries, twin boundaries, and matrix carbides also acted as dislocation sources. Most dislocation activity at low strains was confined to planar arrays. A conceptual model is presented to explain the effects of interfacial and matrix microstructure on microdeformation and primary side stress corrosion cracking (SCC) of alloy 600 tubing. Microstructure is linked to intergranular stress corrosion cracking (IGSCC) resistance through its influence on microdeformation behavior and the resultant crack tip stress state. Dislocation source activity at grain interfaces is proposed to be critical in controlling IGSCC susceptibility. Effective sources such as grain boundary carbides promote crack blunting, decrease the crack tip stress state, and increase resistance to cracking.Keywords
This publication has 11 references indexed in Scilit:
- High voltage electron microscopy observations of microdeformation in alloy 600 tubingScripta Metallurgica, 1986
- An Auger Electron Spectroscopic Study of Phosphorus Segregation in the Grain Boundaries of Nickel Base Alloy 600Corrosion, 1981
- A Comparative Study of Stress Corrosion Cracking Of Steam Generator Tube Materials in Water at 315 CCorrosion, 1981
- Stress corrosion cracking of Inconel 600 tubing in deaerated high temperature water1979
- Caustic Stress Corrosion Cracking Studies at 288 C (550 F) Using the Straining Electrode Technique — Comparison of Alloy 600, Alloy 800, and Type 304 Stainless SteelCorrosion, 1978
- Caustic Stress Corrosion of Fe-Cr-Ni Austenitic AlloysCorrosion, 1977
- Effect of Microstructure on Stress Corrosion Cracking of Alloy 600 in High Purity WaterCorrosion, 1977
- Review of the Stress Corrosion Cracking of Inconel 600Corrosion, 1975
- Influence de la contrainte, des traitements thermiques et des couplages sur la fissuration intergranulaire des alliages 1nconel 600 et X 750Journal of Nuclear Materials, 1975
- Ductile versus brittle behaviour of crystalsPhilosophical Magazine, 1974