Workspace Determination of General 6-d.o.f. Cable Manipulators
- 1 January 2008
- journal article
- Published by Taylor & Francis in Advanced Robotics
- Vol. 22 (2-3) , 261-278
Abstract
This paper addresses workspace determination of general 6-d.o.f. cable-driven parallel manipulators with more than seven cables. The workspace under study is called force-closure workspace, which is defined as the set of end-effector poses satisfying the force-closure condition. Having force-closure in a specific end-effector pose means that any external wrench applied to the end-effector can be balanced through a set of non-negative cable forces under any motion condition of the end-effector. In other words, the inverse dynamics problem of the manipulator always has a feasible solution at any pose in the force-closure workspace. The workspace can be determined by the Jacobian matrix and, thus, it is consistent with the usual definition of workspace in the robotics literature. A systematic method of determining whether or not a given end-effector pose is in the workspace is proposed. Based on this method, the shape, boundary, dimensions and volume of the workspace of a 6-d.o.f., eight-cable manipulator are discussed.Keywords
This publication has 14 references indexed in Scilit:
- Wrench-feasible workspace generation for cable-driven robotsIEEE Transactions on Robotics, 2006
- Force-closure workspace analysis of cable-driven parallel mechanismsMechanism and Machine Theory, 2006
- Dynamic Performance Limitations Due to Yielding in Cable-Driven Robotic ManipulatorsJournal of Mechanical Design, 2005
- Determination of the Dynamic Workspace of Cable-Driven Planar Parallel MechanismsJournal of Mechanical Design, 2005
- Design and workspace analysis of a 6–6 cable-suspended parallel robotMechanism and Machine Theory, 2004
- 3D Cable‐Based Cartesian Metrology SystemJournal of Robotic Systems, 2004
- Estimating the Controllable Workspace of Tendon-Based Stewart Platforms2000
- Parallel wire suspension mechanisms with a hierarchical structureAdvanced Robotics, 2000
- High-speed manipulation by using parallel wire-driven robotsRobotica, 2000
- A Minimal, Minimal Linkage: The Tension-Compression Parallel Link Manipulator1993