Research of features of oscillating process’ behavior in the nonlinear system of individual traction drive of an electrobus
Open Access
- 24 June 2023
- journal article
- research article
- Published by ECO-Vector LLC in Izvestia MGTU MAMI
- Vol. 17 (1) , 87-96
Abstract
BACKGROUND: When a vehicle is in motion, self-oscillations which properties are dependent on slip rate in a contact patch may occur in the area of tire interaction with ground surface. Oscillations frequency will vary in dependence with value of wheel slip relative to ground surface. Soft self-oscillations are excited by variable set of initial conditions at full slip in traction and driven wheel rolling modes as well as in mixed braking mode with partial slip. Hard mode of self-oscillations occurs at full wheel slip in braking mode. These processes have a negative impact on the processes in electric drive and mechanical drivetrain reducing their efficiency and may cause damage of components. Oscillations in the system are excited by interaction forces of an elastic tire with ground surface featuring vertical oscillations due to elastic behavior of its interaction with road unevenness. AIMS: Research of features of oscillating process behavior in the nonlinear system of individual traction drive of an electrobus. METHODS: Simulation of self-oscillation excitation processes in the area of contact interaction of a wheel and road was carried out in the MATLAB/Simulink software package. RESULTS: The article features the results of simulation and experimental studies of self-oscillation excitation processes of the KAMAZ 6282 electrobus moving on asphalt-concrete surface. It was found that vertical wheel displacement when moving through unevenness lead to oscillating behavior of vertical reaction forces in contact patches and, as a consequence, to oscillating behavior of longitudinal reaction forces, torque and rotation velocity of the shaft of the traction electric motor of the individual drive. It was defined that tire oscillation frequency is 67 Hz that coincides with electric motor shaft rotation oscillation frequency and this value is the same for both experiment and simulation. CONCLUSIONS: Practical value of the study lies in ability of using the study results at development of self-oscillation processes exclusion algorithms as a part of vehicle control system.Keywords
This publication has 17 references indexed in Scilit:
- Self-oscillations in the braking process of a vehicleMoscow University Mechanics Bulletin, 2015
- 8×8 Wheeled Vehicle Modeling in a Multibody Dynamics Simulation SoftwareProcedia Engineering, 2015
- Modeling Truck Driveline Dynamic Loads at Differential Locking Unit EngagementProcedia Engineering, 2015
- Development of ABS ECU with Hardware-in-the-Loop Simulation Based on Labcar SystemSAE International Journal of Passenger Cars - Electronic and Electrical Systems, 2014
- 8×8 Platform for Studing Terrain Mobility and Traction Performance of Unmanned Articulated Ground Vehicles with Steered WheelsSAE International Journal of Advances and Current Practices in Mobility, 2013
- Experimental verification of a mathematical model of the wheel-supporting surface interaction during nonstationary rolling motionJournal of Machinery Manufacture and Reliability, 2009
- Estimation of Chaotic and Regular (Stick–Slip and Slip–Slip) Oscillations Exhibited by Coupled Oscillators with Dry FrictionNonlinear Dynamics, 2005
- Dynamics and Stability of a Two Degree of Freedom Oscillator With an Elastic StopJournal of Computational and Nonlinear Dynamics, 2005
- ANALYSIS OF DISC BRAKE NOISE USING A TWO-DEGREE-OF-FREEDOM MODELJournal of Sound and Vibration, 2002
- Analysis and redesign of an antilockbrake system controllerIEE Proceedings - Control Theory and Applications, 1997