AAAkop V. Antonyan

Akop V. Antonyan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Akop V. Antonyan has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    FUNCTIONAL STRUCTURE AND ALGORITHMS OF SOFTWARE FOR MECHATRONIC CONTROL SYSTEMS OF VEHICLE

    by Akop V. Antonyan, Антонян Акоп Ваганович

    BACKGROUND: Modern vehicles are equipped with a set of mechatronic systems that are responsible for ensuring the vehicle's dynamics. These systems include the traction electric drive control system, the electromechanical braking system, and the electric steering system. Despite their different functions, they share a similar top-level software architecture. This unified approach simplifies the development, scaling, and integration of mechatronic systems. AIM: Development of a functional structure for the top-level software of mechatronic systems consisting of groups, functions, and algorithms. METHODS: When developing the structure of the mechatronic system, a system analysis of the architecture was applied. The mechatronic system was decomposed into functional groups that perform data reception and processing, control action generation, diagnostics, and safety control. The development took into account the tracing of data flows between functional groups. RESULTS: A functional structure of the software for a mechatronic control system is proposed, which includes data reception, processing, central (main) logic, diagnostics, security monitor, and data sending groups. CONCLUSION: A functional structure of the mechatronic system software is proposed, which allows for a unified approach to the development of traction electric drive control systems, electromechanical braking systems, and electric steering systems.

  • Open Access

    Functional structure and algorithms of vehicle electromechanical braking system

    by A. V. Antonyan, A. V. Keller, А. В. Антонян, А. В. Келлер

    Introduction.  The development of electric vehicles is accompanied by a transition to electromechanical braking systems, which eliminate the need for traditional hydraulic drives. This requires the development of a structured architecture, software and control routines that ensure the joint, conflict-free operation of electromechanical braking system algorithms. The aim of this work is to develop a functional structure and software algorithms for a vehicle electromechanical braking system. Materials and Methods.  A method of functional software decomposition for the electromechanical braking system is applied, including groups for data reception and processing, control action generation, diagnostics and safety assurance, and data transmission. Results.  A functional software structure for the electromechanical braking system is proposed, which includes groups for data acquisition and processing, control action generation, diagnostics and safety assurance, and data transmission. A set of control algorithms for the requested braking torque has been developed. Practical Significance.  The developed functional structure and algorithms can be used in the software design of electromechanical braking systems of electric vehicles, providing a structured representation of the entire software architecture for mechatronic systems. Originality.  Originality lies in the formulation of the functional software structure for the electromechanical braking system and the systematization of braking control algorithms, taking into account dynamic stabilization and the interaction between mechanical and regenerative braking.

  • Open Access

    Functional structure and algorithms of the mechatronic control system of a vehicle’s traction electric drive

    by Akop V. Antonyan, Антонян Акоп Ваганович, Andrey V. Keller, Келлер Андрей Владимирович

    BACKGROUND: The traction electric drive control system is one of the key mechatronic systems of an electric vehicle, which determines the implementation of acceleration dynamics, regenerative braking, and motion stabilization. The complexity of the traction electric drive structure, the expansion of the number of modes and operating states, as well as the need to interact with third-party components, requires the structuring of the upper-level software architecture. A structured approach simplifies the development and scaling of the traction electric drive control system. Therefore, the development of a functional architecture and structure with an algorithm registry is relevant. AIM: Development of the functional structure and the algorithm registry of the mechatronic control system for the vehicle’s traction electric drive, which ensures the generation of control actions, data processing, diagnostics, and monitoring of the mechatronic system’s safety. METHODS: The traction electric drive control system software has been decomposed. The data flows and software module interactions have been analyzed to create the functional structure and the algorithm registry. RESULTS: The functional structure of the software of the mechatronic control system of the traction electric drive has been developed. The composition of functional groups, functions and algorithms providing processing of the received data, determination of driving modes, formation of traction and regenerative torque, limitation of slip of driven wheels and axles, as well as control of safe operation of the mechatronic system is presented. CONCLUSION: The proposed functional structure and algorithm registry allow to organize the software of the mechatronic traction electric drive control system, to ensure scalability and integration with third-party systems. The results obtained can find application in the development of the upper-level software of the mechatronic traction electric drive control system.

  • Open Access

    Anti-Slip Control System with Self-Oscillation Suppression Function for the Electromechanical Drive of Wheeled Vehicles

    by Aleksandr V. Klimov, Akop V. Antonyan, Andrey V. Keller, Sergey S. Shadrin, Daria A. Makarova, Yury M. Furletov

    The movement of a wheeled vehicle is a non-regular dynamic process characterized by a large number of states that depend on the movement conditions. This movement involves a large number of situations where elastic tires skid and slip against the base surface. This reduces the efficiency of movement as useful mechanical energy of the electromechanical drive is spent to overcome the increased skidding and slipping. Complete sliding results in the loss of control over the vehicle, which is unsafe. Processes that take place immediately before such phenomena are of special interest as their parameters can be useful in diagnostics and control. Additionally, such situations involve adverse oscillatory processes that cause additional dynamic mechanical and electrical loading in the electromechanical drive that can result in its failure. The authors provide the results of laboratory road research into the emergence of self-oscillatory phenomena during the rolling of a wheel with increased skidding on the base surface and a low traction factor. This paper reviews the methods of designing an anti-slip control system for wheels with an oscillation damping function and studies the applicability and efficiency of the suggested method using mathematical simulation of the virtual vehicle operation in the Matlab Simulink software package. Using the self-oscillation suppression algorithm in the control system helps reduce the maximum amplitude values by 5 times and average amplitudes by 2.5 times while preventing the moment operator from changing. The maximum values of current oscillation amplitude during algorithm changes were reduced by 2.5 times, while the current change rate was reduced by 3 times. The reduction in the current-change amplitude and rate proves the efficiency of the self-oscillation suppression algorithm. The high change rate of the current consumed by the drive’s inverters may have a negative impact on the remaining operating life of the rechargeable electric power storage system. This impact increases with the proximity of its location due to the low inductance of the connecting lines and the operating parameters, and the useful life of the components of the autonomous voltage inverters.


  • Open Access

    Developing an Algorithm Limiting the Longitudinal Acceleration of an Electric Vehicle

    by Akop Antonyan, Aleksandr Klimov, Andrey Buchkin, Andrey Keller, Sergey Shadrin, Daria Makarova, Yury Furletov

    The electric traction drive is increasingly being applied as a device providing traction force on driving wheels. This is due to its reliable torque transmission to the driving wheels, step-less regulation of the traction force on the driving wheels depending on the driving conditions, and increased design capabilities. In terms of power, the electric traction drive has maximum torque at low speeds, which internal combustion engines lack. This property of the electric drive is not applied in urban vehicles, as not all passengers are comfortable with intensive acceleration. In modern vehicles with an electric traction drive, the maximum acceleration can be limited by software, which is the focus of this study. This paper aims to develop an algorithm capable of recognizing when the permissible longitudinal acceleration exceeds the limit and generating an action to maintain the acceptable acceleration level. The electric traction drive of a large-class electric bus was used as a control object. An algorithm and a control law are hereby developed, which reduce longitudinal acceleration using PI control. Both simulation modeling and full-scale tests on the electric bus were carried out to evaluate the performance and efficiency of the algorithm. In this paper, the authors also introduce the cumulative velocity concept and prove the operability and efficiency of the developed method.


  • Open Access

    Study of the operability and effectiveness of the algorithm for controlling the acceleration and deceleration of a wheeled vehicle by means of an accelerator pedal in conditions of highway traffic

    by Alexander V. Klimov, Baurzhan K. Ospanbekov, Akop V. Antonyan

    BACKGROUND: Modern battery-powered vehicles still do not meet the needs of consumers in terms of autonomous mileage. Therefore, the problem of increasing the energy efficiency in order to reduce energy consumption for motion is highly relevant. One of the directions, along with the use of more efficient units and systems, is the development of control algorithms that minimize these costs and make it possible to control the motion using only the accelerator pedal. AIM: The study of the operability and effectiveness of the algorithm for controlling a vehicle only with an accelerator pedal using virtual simulation of motion, further practical implementation of the algorithm in the control system. METHODS: The study was carried out using the MATLAB/Simulink software package. RESULTS: The paper describes the functioning of the single-pedal control algorithm using the example of a passenger vehicle with an individual traction electric drive, the results of virtual simulation proving its operability and energy efficiency for the case of highway traffic. CONCLUSION: The practical value of the study lies in the proven operability, energy efficiency, and the possibility of using the algorithm for development of the software for vehicle motion control systems.

  • Open Access

    The method of protecting an articulated electric bus from rollover

    by Akop V. Antonyan, Alexander V. Klimov, Andrey O. Buchkin

    BACKGROUND: The current trend of using electric buses has been growing in the last few years. Articulated electric buses also take the routes. These vehicles, due to the presence of heavy traction batteries mainly on the roof, have a tendency to an increased roll angle and a tendency to rollover. Therefore, there is a need to apply anti-rollover measures for such vehicles. AIM: Development of the control law and algorithm that are capable of decreasing the tendency of an articulated electric bus to rollover by means of reducing the torque. METHODS: During the development and research of the algorithm, the MATLAB/Simulink simulation environment with the developed mathematical model of spatial motion of an articulated electric bus is used. RESULTS: The derivation of formulae for calculating the critical turning velocity of sections for articulated vehicles is presented, an algorithm and a traction control law are formulated depending on the turning parameters, the graphs that justify the operability and effectiveness of the algorithms are presented. CONCLUSION: The practical value of the developed algorithm lies in its practical application on an articulated vehicle in order to reduce the tendency to increased roll angles and to protect it from rollover.


  • Open Access

    Detecting Wheel Slip to Suppress Self-Excited Oscillations in Braking Mode

    by Aleksander V. Klimov, Baurzhan K. Ospanbekov, Akop V. Antonyan, Viktor R. Anisimov, Egor A. Dvoeglazov, Danila A. Novogorodov, Andrey V. Keller, Sergey S. Shadrin, Daria A. Makarova, Vladimir S. Ershov, et al.

    The wheels of decelerating vehicles in braking mode roll with increased slip, up to complete lock-up, which is a negative phenomenon. This is effectively managed by the anti-lock braking system (ABS). However, in the course of braking, especially before the system activation, self-excited oscillatory processes with high amplitudes may occur, causing increased dynamic loads on the drive system. The paper studies the braking processes of a vehicle with an electromechanical individual traction drive in both electrodynamic regenerative and combined braking modes, utilizing the drive and the primary braking system. The theoretical framework is provided for identifying the self-excited oscillation onset conditions and developing a technique to detect wheel slips during braking to suppress these oscillations. To check the functionality of the wheel-slip observer in braking mode, the performance of the self-excited oscillation pulse suppression algorithm was studied in the MATLAB Simulink 2018b software package. The study results can be used to develop control systems equipped with the function of suppressing self-excited oscillations by vehicle motion.


  • Determination of rational regulations of diesel engine fuel supply equipment when working on biomineral fuel mixtures

    by Plotnikov S.A. Kartashevich A.N. Zabolotskih G.E.

    Издательство технической литературы выпускает технические журналы, в частности - журнал «Грузовик: транспортный комплекс, спецтехника»

  • A new approach to methods for determining the stickiness of soils during their development by the working bodies of earthmoving machines

    by Grigorev P.A. Sladkova L.A.

    Издательство технической литературы выпускает технические журналы, в частности - журнал «Грузовик: транспортный комплекс, спецтехника»