Analysis of Corrosion-Resistant Ruthenium-Doped Titanium Alloys by Inductively Coupled Plasma Atomic Emission Spectroscopy
- 1 December 2019
- journal article
- research article
- Published by Pleiades Publishing Ltd in Inorganic Materials
- Vol. 55 (14) , 1365-1370
Abstract
A technique for analyzing new corrosion-resistant ruthenium-doped titanium alloys using inductively coupled plasma atomic emission spectrometry (ICP-AES) with microwave sample preparation is reported. The composition of a mixture of acids and the temperature and time parameters of sample preparation of titanium alloys under microwave heating in an autoclave ensuring quantitative conversion of the sample into a convenient analytical form without loss of volatile components for subsequent ICP-AES analysis are substantiated. Optimal conditions for the excitation of the analytical signal have been found, and analytical lines of elements without spectral noise have been selected. Samples of experimental melts of industrial titanium alloys of various classes, volumetrically doped with ruthenium, which are under development and are not yet commercially produced in the Russian Federation (alloy PT-7M + Ru, PT-3B + Ru, 5B + Ru, 37 + Ru, VT-22 + Ru) have been studied. The alloy samples contained the following alloying elements (wt %): Al (1.8–6.3); V (1.0–5.5); Mo (0.7–5.5); Zr (0.2–3.0); Cr (0.5–1.5); Fe (0.5–1.5); Ru (0.05–0.15). The correctness of the determination of alloying elements has been confirmed by analyzing standard samples by varying their mass and, in the case of ruthenium, by the “introduced–found” method. The developed method significantly reduces the time of analysis by combining the multielement ICP-AES method with microwave sample preparation, expands the list of detectable elements in titanium alloys, and improves the precision of the results of analysis.Keywords
This publication has 6 references indexed in Scilit:
- Rhenium and ruthenium determination in nanostructured high-temperature alloys for aerospace engineeringInorganic Materials, 2015
- Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)2015
- Determination of Ruthenium in Heat-Resistant Nickel Alloys by Atomic Emission Spectrometry with Inductively Coupled PlasmaJournal of Applied Spectroscopy, 2013
- Handbook of Basic Atomic Spectroscopic DataJournal of Physical and Chemical Reference Data, 2005
- Microwave radiation in analytical chemistry: the scope and prospects for applicationRussian Chemical Reviews, 2002
- Use of magnesium as a test element for inductively coupled plasma atomic emission spectrometry diagnosticsAnalytica Chimica Acta, 1991