Mechanical performance of eco-friendly cement mortar incorporating aluminum dross under acidic exposure
Open Access
- 21 April 2026
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Abstract
The incorporation of aluminum dross into cement-based mortars offers potential benefits for environmental sustainability; however, it may adversely affect the mechanical performance of the material. This study integrates experimental testing with statistical analysis to evaluate the influence of aluminum dross on the mechanical properties of mortar specimens exposed to sulfuric acid (pH 1.5). Compressive strength, flexural strength, and mass variation were measured for mortars containing different aluminum dross contents. Following 28 days of water curing, the specimens were immersed in sulfuric acid for periods ranging from 0 to 90 days. The results indicate that exposure to sulfuric acid led to progressive deterioration in all mortar mixtures, with average reductions of 39% in compressive strength after 14 days and about 80% after 90 days. Before acid exposure, increasing aluminum dross content reduced the initial mechanical strength by up to 28% compared with the control mixture. Under prolonged acidic conditions, slag-containing mortars—particularly those incorporating 10% and 15% aluminum dross—exhibited reduced strength loss and enhanced acid resistance compared to slag-free control specimens. Statistical analysis demonstrated strong correlations between mechanical properties, acid exposure duration, and mass loss, whereas the effect of aluminum dross content was less significant. These findings underline both the potential benefits and the practical limitations of using aluminum dross in sustainable cement mortar applications subjected to acidic exposure.Keywords
This publication has 40 references indexed in Scilit:
- Sustainable Concrete Design Using Aluminium and Magnesium Dross: Mechanical and Durability PerformanceIranian Journal of Science and Technology, Transactions of Civil Engineering, 2025
- Valorization study of mixing aluminum slag with binary geopolymer blends to produce lightweight geopolymer concreteConstruction and Building Materials, 2025
- Optimizing the use of secondary aluminium dross to produce high-performance sintered artificial aggregatesConstruction and Building Materials, 2025
- Enhancing sustainability in concrete construction: Utilizing copper slag for improved properties of geopolymer concreteConstruction and Building Materials, 2024
- Effect of fillers on the mechanical properties and durability of steel slag concreteConstruction and Building Materials, 2022
- Sustainability of Internally-Cured Concrete for Mitigating Shrinkage Cracking Using Service Life Prediction Models2021
- Effect of copper slag on the resistance characteristics of SCC exposed to the acidic environmentAsian Journal of Civil Engineering, 2019
- The Resistance of Blast Furnace Slag- and Ferrochrome Slag-Based Geopolymer Concrete Against Acid AttackInternational Journal of Civil Engineering, 2019
- Eco-concrete for sustainability: utilizing aluminium dross and iron slag as partial replacement materialsClean Technologies and Environmental Policy, 2017
- The effects of nano-calcined kaolinite clay on cement mortar exposed to acid depositsConstruction and Building Materials, 2016