Effect of liquid-solid ratio on metakaolin-based geopolymer binder properties
Open Access
- 26 March 2025
- journal article
- Published by Akademiai Kiado Zrt. in Pollack Periodica
- Vol. 20 (1) , 110-116
Abstract
This article aims to achieve the hardening of geopolymer binder-based metakaolin under the same setting time and hardening temperature as traditional cement. It studied the hardening of the geopolymer binder-based metakaolin at two temperatures of 60 °C and room temperature using different liquid-to-solid ratios of 0.8, 0.95, and 1.1. The bulk density, compressive strength, sitting times, thermal conductivity, and microstructure were measured for geopolymer binders. Based on the specified range for cement characteristics, the geopolymer binder was solidified at room temperature, utilizing a liquid-to-solid ratio of 0.8 to achieve optimal results stratified according to the cement's ideal characteristics. It had a bulk density of 1.264 g cm−3, compressive strength of 19.12 MPa, initial setting time of 288 min, final setting time of 358 min, and thermal conductivity of 0.49 W m−1 K.Keywords
This publication has 16 references indexed in Scilit:
- Comparative study of metakaolin-based geopolymer characteristics utilizing different dosages of water glass in the activator solutionResults in Engineering, 2023
- Valorization of sugar beet waste as an additive for fly ash geopolymer cement cured at room temperatureJournal of Building Engineering, 2021
- Mine wastes based geopolymers: A critical reviewCleaner Engineering and Technology, 2020
- The Effects of Solid to Liquid Ratio on Fly Ash Based Lightweight GeopolymerIOP Conference Series: Materials Science and Engineering, 2020
- Investigation of Heat Released during Geopolymerization with Fly Ash based GeopolymerIOP Conference Series: Materials Science and Engineering, 2019
- Geopolymer mortars as sustainable repair material: A comprehensive reviewRenewable and Sustainable Energy Reviews, 2017
- Effect of the rate of calcination of kaolin on the properties of metakaolin-based geopolymersJournal of Asian Ceramic Societies, 2015
- The effects of ground granulated blast-furnace slag blending with fly ash and activator content on the workability and strength properties of geopolymer concrete cured at ambient temperatureMaterials & Design (1980-2015), 2014
- The Effect of Temperature and Duration of Curing on the Strength of Fly Ash Based Geopolymer MortarProcedia Engineering, 2014
- Study of ion cluster reorientation process of geopolymerisation reaction using semi-empirical AM1 calculationsCement and Concrete Research, 2009