Targeted residual stress generation in single and two point incremental sheet forming (ISF)
Open Access
- 3 May 2021
- journal article
- research article
- Published by Springer Nature in Archive of Applied Mechanics
- Vol. 91 (8) , 3465-3487
Abstract
The mechanical properties and the operating life of a formed component are highly dependent on the residual stress state. There is always a high magnitude of residual stresses in the components formed by incremental sheet forming (ISF) due to the localized deformation mechanism. Hence, a thorough understanding of the generation of the residual stresses by ISF is necessary. This study investigates the residual stress generation mechanism for two process variants of ISF, i.e., Single Point Incremental Forming (SPIF) and Two Point Incremental Forming (TPIF). This understanding is used to control and targetedly generate the residual stresses to improve the part performance. In this regard, the residual stress state in a truncated cone geometry manufactured using SPIF and disc springs manufactured using TPIF was experimentally analyzed. Validated numerical models for both process variants were developed to study the residual stresses in detail. The residual stress state in SPIF is such that the tool contact side develops tensile residual stresses and the non-contact side undergoes compressive residual stresses. The tool step-down variation was used to control residual stresses and improve the fatigue strength of truncated cones manufactured using SPIF. For TPIF, two different forming strategies were used to analyze the residual stress generation mechanism and the role of major process parameters. The residual stresses for TPIF are pre-dominantly compressive in both directions of forming tool motion. For both process variants of the ISF process, it is shown that the residual stresses can be beneficially utilized to improve mechanical properties of the components.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (BA 4253/6-2, WA 1672/31-2’, TE 508/67-2)
- Brandenburgische TU Cottbus-Senftenberg
This publication has 21 references indexed in Scilit:
- Integrated Forming and Surface Engineering of Disc Springs by Inducing Residual Stresses by Incremental Sheet FormingMaterials, 2019
- Setting Component Properties in Incremental Forming2019
- Incremental sheet forming for prototyping automotive modulesProcedia Manufacturing, 2019
- Forming mechanisms-related residual stress development in single point incremental formingProduction Engineering, 2018
- Engineering the residual stress state of the metastable austenitic stainless steel (MASS) disc springs by incremental sheet forming (ISF)Production Engineering, 2018
- A modular tooling set-up for incremental sheet forming (ISF) with subsequent stress-relief annealing under partial constraintsAIP Conference Proceedings, 2017
- An overview of stabilizing deformation mechanisms in incremental sheet formingJournal of Materials Processing Technology, 2009
- Strategies to improve the geometric accuracy in asymmetric single point incremental formingProduction Engineering, 2009
- Residual Stress In Sheet Metal Parts Made By Incremental Forming ProcessAIP Conference Proceedings, 2007
- Asymmetric Single Point Incremental Forming of Sheet MetalCIRP Annals, 2005