Influence of Lubricant Supply on Thermal and Efficient Performances of a Gear Reducer for Electric Vehicles
- 20 October 2021
- journal article
- research article
- Published by ASME International in Journal of Tribology
- Vol. 144 (1) , 1-22
Abstract
The amount of lubricating oil in a gear reducer greatly influences components’ temperature and efficiency of the reducer. A thermal network simulation model of a gear reducer for electric vehicles based on amesim software was built for thermal and efficiency analysis of the reducer, where heat production and transfer processes of each component in the reducer are considered. Moreover, secondary development submodels were developed to calculate the convection coefficients in real time based on different lubricating oil temperatures and working conditions. Next, the experiments were conducted to verify the developed model regarding transmission efficiency and lubricating oil equilibrium temperature in the reducer. The deviation between the numerical and experimental results is less than 5%, which indicates high accuracy of the developed thermal network model. Thereafter, efficiency and heat balance simulation tests under different working conditions were performed to determine an optimal lubricating oil supply, which is 14 mm gear-oil-immersion oil supply in this study. Finally, a comparison between the reducer with the optimal oil supply and that with normally used 22 mm gear-oil-immersion supply in the NEDC cycles in low temperature was done. The reducer with the optimal oil supply shows 1.032% energy saving. The method presented in this article provides a good guide to design and optimization of the gear reducer for electrical vehicles.Keywords
This publication has 20 references indexed in Scilit:
- Design of 2-speed transmission for electric commercial vehicleInternational Journal of Automotive Technology, 2014
- A Temperature Field Model of Complicated Thermal Analysis System Based on Thermal Network MethodAdvanced Materials Research, 2013
- Power flow and efficiency analysis of epicyclic gear transmission with split powerMechanism and Machine Theory, 2013
- Investigations on power losses in high-speed gearsProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2006
- Finite element modeling of friction stir welding—thermal and thermomechanical analysisInternational Journal of Machine Tools and Manufacture, 2003
- Effect of temperature on the scuffing load capacity of EP gear lubricantsTribotest, 2001
- Efficiency of Nonstandard and High Contact Ratio Involute Spur GearsJournal of Mechanical Design, 1986
- Elastohydrodynamic Lubrication of Line ContactsA S L E Transactions, 1984
- Network Analysis Approach to Multidimensional Modeling of Transistors Including Thermal EffectsIEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 1982
- Rolling element bearing dynamicsWear, 1973