LLLiang Luo

Liang Luo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Liang Luo has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Adaptability Study of a Semi-active Anti-rolling Device for Active Tilting Trains

    by Mingxing Liu, Nong Zhang, Minyi Zheng, Liang Luo, Weimin Zhong, Zhengfeng Yan

  • A study of a novel hydraulically interconnected anti-hunting damping system for high-speed trains

    by Mingxing Liu, Nong Zhang, Minyi Zheng, Liang Luo, Weimin Zhong, Zhengfeng Yan


  • Design and Analysis of a New Pressure Relief Valve for Oil-Immersed Electrical Equipment

    by Liang Luo, Jinzhong Li, Nong Zhang, Ke Wang, Shuqi Zhang, Ningchuan Liang

    Internal arcing in oil-immersed electrical equipment is inevitable and of great danger. Transient overpressure should be released by protectors quickly and controllably. Currently available pressure relief valves cannot fully protect the electrical equipment due to mismatch between insufficient relief capacity with correspondingly weak valve structure and increasing arcing energy in upgrading electrical systems. Additionally, flaming possibility of ejected high-temperature oil–gas mixture is distinct, and retained oil in an oil tank without any isolation may be ignited by the flame. Unfortunately, resealing of some existing single-outlet valves is out of control due to asymmetrical hydraulic pressure distribution on the valve plate which causes unstable valve plate movement. Therefore, a new pressure relief valve characterized by symmetrical outlets and improved pressure relief capacity was developed. The novel structure and function of the new valve was first introduced, and comprehensive analysis regarding dynamic performances, strength and fluid development during the relief process were conducted. Finally, a prototype was manufactured and tested on a specific arcing test system. The developed valve can well release the overpressure generated by a 6 MJ equivalent arcing fault without any flame during the entire relief process. Furthermore, the valve structure can withstand the pressure load, and valve plate can precisely reseal the oil tank due to optimized fluid pressure distribution. This research provides an optimized pressure relief valve and a design guide for improved pressure relief valve.


  • Influence of Lubricant Supply on Thermal and Efficient Performances of a Gear Reducer for Electric Vehicles

    by Bo Zhu, Xiang Wang, Liang Luo, Nong Zhang, Xijian Liu

    The amount of lubricating oil in a gear reducer greatly influences components’ temperature and efficiency of the reducer. A thermal network simulation model of a gear reducer for electric vehicles based on amesim software was built for thermal and efficiency analysis of the reducer, where heat production and transfer processes of each component in the reducer are considered. Moreover, secondary development submodels were developed to calculate the convection coefficients in real time based on different lubricating oil temperatures and working conditions. Next, the experiments were conducted to verify the developed model regarding transmission efficiency and lubricating oil equilibrium temperature in the reducer. The deviation between the numerical and experimental results is less than 5%, which indicates high accuracy of the developed thermal network model. Thereafter, efficiency and heat balance simulation tests under different working conditions were performed to determine an optimal lubricating oil supply, which is 14 mm gear-oil-immersion oil supply in this study. Finally, a comparison between the reducer with the optimal oil supply and that with normally used 22 mm gear-oil-immersion supply in the NEDC cycles in low temperature was done. The reducer with the optimal oil supply shows 1.032% energy saving. The method presented in this article provides a good guide to design and optimization of the gear reducer for electrical vehicles.


  • Design and Analysis of a Water-Cooling System in a New Yokeless and Segmented Armature Axial In-Wheel Motor for Electric Vehicles

    by Liang Luo, Jiujian Chang, Jinglai Wu, Bo Zhu, Minyi Zheng, Nong Zhang

    An in-wheel motor, as a key part of an in-wheel driving system, needs to satisfy strict restrictions on thermal balance for increasingly high-power density in limited space and weight. Therefore, a new in-wheel motor with an innovative water-cooling system for one newly developed electric vehicle was developed. Based on the mechanical structure of the motor, all potential water-cooling layouts were first designed with consideration of mechanical strength and manufacturability. A thermal conjugate simulation model of the developed in-wheel motor was then built, and its thermally fluid–solid interactions were investigated in this study. All potential water-path layouts of the motor were compared regarding the cooling effect and fluid resistance, which impact the performance of the motor. Fluid flow velocity and fluid state, determined by the water-path layout, significantly impact the cooling effect of the motor. The well-designed water-cooling system significantly reduces the motor’s temperature at a low cost on required coolant-driven pressure which benefits the efficiency of the developed motor. A prototype of the developed motor with the optimal water-path layout was built and tested on the test rig. The developed motor provides outstanding thermal performance.


  • A Study of a New Bidirectional Pressure-Regulating Valve for Hydraulically Interconnected Suspension Systems

    by Liang Luo, Nong Zhang, Minyi Zheng, Jinglai Wu, Bo Zhu

    Due to inevitable inner leakage in hydraulic circuits and structural limits of a hydraulically interconnected suspension (HIS) system, pressure difference between HIS's two independent hydraulic circuits leads to vehicular unbalance under noncornering driving conditions and deteriorates HIS's performance under steering driving conditions. In order to address this problem, a new bidirectional pressure-regulating valve was designed to balance hydraulic pressures in the two HIS's hydraulic circuits under noncornering driving conditions. Moreover, it separates the two hydraulic circuits and enables HIS's antirollover function under cornering driving conditions. Detailed structure and functions of this valve were introduced first. Systematic and computational fluid dynamics (CFD) simulation results show that the gap between the spool and cylinder is of importance to valve's performance. Experimental results validate that the developed valve satisfies all requirements of the HIS. Furthermore, the valve can distinguish steering and nonsteering conditions and enables HIS's function accurately without any pressure shock.


  • Open Access

    Performance Evaluation and Lubrication Mechanism of Water-Based Nanolubricants Containing Nano-TiO2 in Hot Steel Rolling

    by Hui Wu, Jingwei Zhao, Liang Luo, Shuiquan Huang, Lianzhou Wang, Suoquan Zhang, Sihai Jiao, Han Huang, Zhengyi Jiang

    Hot rolling tests of a low-alloy steel were conducted at a rolling temperature of 850 °C under different lubrication conditions, including benchmarks (dry condition and water) and water-based nanolubricants containing different concentrations of nano-TiO2 from 1.0 to 8.0 wt%. The effects of nanolubricants on rolling force, surface roughness, thickness of oxide scale, and microstructure were systematically investigated through varying nano-TiO2 concentrations. The results show that the application of nanolubricants can decrease the rolling force, surface roughness and oxide scale thickness of rolled steels, and refine ferrite grains. In particular, the nanolubricant containing an optimal concentration (4.0 wt%) of nano-TiO2 demonstrates the best lubrication performance, owing to the synergistic effect of lubricating film, rolling, polishing, and mending generated by nano-TiO2.


  • Open Access

    Simulations of hydro-mechanical deep drawing using Voronoi model and real microstructure model

    by Dongbin Wei, Liang Luo, Hideki Sato, Zhengyi Jiang, Kenichi Manabe