A new laboratory-scale experimental facility for detailed aerothermal characterizations of volumetric absorbers
- 1 January 2016
- conference paper
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1734 (1) , 030018
Abstract
This paper describes a new modular laboratory-scale experimental facility that was designed to conduct detailed aerothermal characterizations of volumetric absorbers for use in concentrating solar power plants. Absorbers are generally considered to be the element with the highest potential for efficiency gains in solar thermal energy systems. The configu-ration of volumetric absorbers enables concentrated solar radiation to penetrate deep into their solid structure, where it is progressively absorbed, prior to being transferred by convection to a working fluid flowing through the structure. Current design trends towards higher absorber outlet temperatures have led to the use of complex intricate geometries in novel ceramic and metallic elements to maximize the temperature deep inside the structure (thus reducing thermal emission losses at the front surface and increasing efficiency). Although numerical models simulate the conjugate heat transfer mechanisms along volumetric absorbers, they lack, in many cases, the accuracy that is required for precise aerothermal validations. The present work aims to aid this objective by the design, development, commissioning and operation of a new experimental facility which consists of a 7 kWe (1.2 kWth) high flux solar simulator, a radiation homogenizer, inlet and outlet collector modules and a working section that can accommodate volumetric absorbers up to 80 mm × 80 mm in cross-sectional area. Experimental measurements conducted in the facility include absorber solid temperature distributions along its depth, inlet and outlet air temperatures, air mass flow rate and pressure drop, incident radiative heat flux, and overall thermal efficiency. In addition, two windows allow for the direct visualization of the front and rear absorber surfaces, thus enabling full-coverage surface temperature measurements by thermal imaging cameras. This paper presents the results from the aerothermal characterization of a siliconized silicon carbide monolithic honeycomb, conducted at realistic conditions of incident radiative power per unit mass flow rate in order to validate its operation.Keywords
This publication has 16 references indexed in Scilit:
- Parametric Study of Volumetric Absorber PerformanceEnergy Procedia, 2014
- Experimental Results of Gradual Porosity Wire Mesh Absorber for Volumetric ReceiversEnergy Procedia, 2014
- Review of high-temperature central receiver designs for concentrating solar powerRenewable and Sustainable Energy Reviews, 2014
- Numerical investigation of flow and heat transfer in a volumetric solar receiverRenewable Energy, 2013
- Volumetric receivers in Solar Thermal Power Plants with Central Receiver System technology: A reviewSolar Energy, 2011
- Numerical simulation of convective heat transfer between air flow and ceramic foams to optimise volumetric solar air receiver performancesInternational Journal of Heat and Mass Transfer, 2011
- Performance Evaluation of the 200-kWth HiTRec-II Open Volumetric Air ReceiverJournal of Solar Energy Engineering, 2003
- Experimental and numerical evaluation of the performance and flow stability of different types of open volumetric absorbers under non-homogeneous irradiationSolar Energy, 1997
- Advanced high-temperature two-slab selective volumetric receiverSolar Energy Materials, 1991
- Testing of a porous ceramic absorber for a volumetric air receiverSolar Energy Materials, 1991