Anodic vacuum arc evaporation of graphite for depositing layers of tetrahedral amorphous carbon
Open Access
- 27 April 2026
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 44 (3)
Abstract
Anodic vacuum arc evaporation was applied to deposit ta-C layers with thicknesses of 1.3–2.2 μm at high deposition rates of up to 18 nm/s. Building on prior work that was limited to a thickness of 0.8 μm due to high heat flux and adhesion issues, substrates with a high heat capacity and adhesion-promoting interlayers were used. Nanoindentation tests revealed hardness values ranging from 71 to 84 GPa and Young’s moduli ranging from 717 to 862 GPa for these layers. Raman spectrometry revealed an sp3 content of 68% to 75%. The layers are free of arc-typical droplets and have a very smooth surface. These results demonstrate that anodic vacuum arc evaporation, when combined with targeted thermal management and interlayer design, provides a scalable method of producing ta-C coatings for challenging mechanical or chemical engineering applications.Keywords
This publication has 20 references indexed in Scilit:
- Diamond-like films of tetrahedral amorphous carbon deposited by anodic arc evaporation of graphiteSurface and Coatings Technology, 2023
- Enhancement of discharge and deposition rate by imposed pulse current during the cathodic arc deposition of ta-C filmsVacuum, 2021
- Effect of defects on wear behavior in ta-C coating prepared by filtered cathodic vacuum arc depositionDiamond and Related Materials, 2020
- Temperature control of metal strip during high-rate vacuum coatingSurface and Coatings Technology, 2016
- 60 years of DLC coatings: Historical highlights and technical review of cathodic arc processes to synthesize various DLC types, and their evolution for industrial applicationsSurface and Coatings Technology, 2014
- “Magnetically enhanced hollow cathode—a new plasma source for high‐rate deposition processes”Plasma Processes and Polymers, 2009
- Stress, mechanical and adhesion properties of multilayer tetrahedral amorphous carbon filmsApplied Surface Science, 2008
- Determination of bonding in amorphous carbons by electron energy loss spectroscopy, Raman scattering and X-ray reflectivityJournal of Non-Crystalline Solids, 2000
- Systematic variation of the Raman spectra of DLC films as a function of sp2:sp3 compositionDiamond and Related Materials, 1996
- Properties of tetrahedral amorphous carbon prepared by vacuum arc depositionDiamond and Related Materials, 1991