Microstructural characteristics of Ni and Ni/Nb ohmic contacts on n-type 4H-SiC

Authors:

Abstract
The microstructures of Ni and Ni/Nb ohmic contacts on 4H-SiC substrates were investigated. Ni-based and Ni/Nb ohmic contacts were successfully formed by rapid thermal annealing for 3 min in N 2 ambient. The Ni/Nb/4H-SiC sample exhibited a range of total resistance of 7.1–7.7 Ω, smaller than 16–24 Ω of the Ni/4H-SiC sample. A higher distribution of carbon atoms was observed in the Ni/4H-SiC sample (95% on the surface and 50% at the interface), confirmed by SEM-EDS and XPS results. Well-controlled carbon atoms, by forming Nb x C y compounds as shown in XRD results, lead to the rougher surface (6.39 nm) of the Ni/Nb/4H-SiC sample compared to the 5.06 nm of the Ni/4H-SiC sample. C-AFM results indicated that smaller variations in the peak current (0.245 nA) and better conductivity (3.6 nA) were achieved for the Ni/Nb/4H-SiC sample. The removal of excess carbon atoms in the presence of Nb enhanced the electrical properties.
Funding Information
  • JST SPRING (JPMJSP2132)
  • Japan Student Services Organization (92406001188)
  • JSPS KAKENHI (JP24H00035)

This publication has 52 references indexed in Scilit: