Dynamic bending behaviour of magnesium alloy rectangular thin-wall beams filled with polyurethane foam
Authors:
- 22 July 2016
- journal article
- research article
- Published by Taylor & Francis in International Journal of Crashworthiness
- Vol. 21 (6) , 597-613
Abstract
This study proposes a hybrid structural design concept of polyurethane foam-filled magnesium alloy AZ31B rectangular thin-walled beams which serve as energy absorbing components in automotive applications. Uniaxial tensile and compressive tests, and fracture tests were performed to investigate the material mechanical properties. Dynamic three-point bending tests were performed to study the deformation/fracture modes and energy absorption capacity for the foam-filled AZ31B beams, and to compare these mechanical properties with those for mild steel DC04 beams. Different AZ31B beams were filled with a variation of foam density (0.05, 0.20 and 0.30 g/cm3). It was found that the AZ31B beam filled with 0.20 g/cm3 foam reached the highest specific energy absorption; moreover, it absorbed more energy and reached much higher specific energy absorption than the foam-filled DC04 beam filled with the same foam, although the former one was nearly 54% lighter. The potential advantage of the foam-filled AZ31B beams is possibly associated with the high work hardening rate of AZ31B sheet in compression, which may involve more material in plastic deformation compared with the foam-filled DC04 beams. It has therefore been demonstrated that the hybrid structural design concept of the polyurethane foam-filled AZ31B beam has potential applications in auto-body structures.Keywords
This publication has 39 references indexed in Scilit:
- Dynamic and quasi-static bending behaviour of thin-walled aluminium tubes filled with aluminium foamComposite Structures, 2014
- Failure modes during uniaxial deformation of magnesium alloy AZ31B tubesInternational Journal of Mechanical Sciences, 2010
- Energy absorption capacity for thin-walled AM60 castings using a shear-bolt principleComputers & Structures, 2007
- An experimental study on the energy absorption capacity of thin-walled castingsInternational Journal of Impact Engineering, 2006
- Numerical modelling of the structural behaviour of thin-walled cast magnesium componentsInternational Journal of Solids and Structures, 2005
- On fracture locus in the equivalent strain and stress triaxiality spaceInternational Journal of Mechanical Sciences, 2004
- Aluminium and magnesium castings – experimental work and numerical analysesInternational Journal of Crashworthiness, 2003
- High-strain-rate compressive behavior of a rigid polyurethane foam with various densitiesExperimental Mechanics, 2002
- Experimental and numerical study on bending collapse of aluminum foam-filled hat profilesInternational Journal of Solids and Structures, 2001
- Characterization of polymeric structural foams under compressive impact loading by means of energy-absorption diagramInternational Journal of Impact Engineering, 2001