The composition and friction-reducing properties of leaf layers
Open Access
- 29 July 2020
- journal article
- research article
- Published by The Royal Society in Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Vol. 476 (2239) , 20200057
Abstract
Every autumn rail networks across the world suffer delays, accidents and schedule changes due to low friction problems caused by leaves landing on the rails. These leaves form a layer that can reduce the friction between the wheel and the rail to a similar level as that between ice and an ice-skate ( μ = 0.01 – 0.05 ). Previous works have generated several hypotheses for the chemical reactions and low friction mechanism associated with these layers. In this work, the reaction between an aqueous extract of sycamore leaves and metallic iron is investigated. This reaction has been shown to produce a black precipitate, which matches field observations of leaf layers, while friction tests with these extracts produce characteristic ultra low friction. The reaction is investigated through FTIR, XPS, CHNS and ICP-MS analysis as well as wet chemical testing. The impact of the reaction on friction is investigated through three rounds of tribological testing. The results indicate that the black precipitate produced is iron tannate, formed by complexation of tannins with dissolved iron ions. Friction testing showed that eliminating tannins from the leaf extract resulted in a significant increase in the friction coefficient compared with the control.Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/R001766/1)
This publication has 17 references indexed in Scilit:
- Chemistry of black leaf films synthesised using rail steels and their influence on the low friction mechanismRSC Advances, 2018
- The low adhesion problem due to leaf contamination in the wheel/rail contact: Bonding and low adhesion mechanismsWear, 2017
- A new method for the assessment of traction enhancers and the generation of organic layers in a twin-disc machineWear, 2016
- Mapping the friction between railway wheels and rails focusing on environmental conditionsWear, 2015
- Laboratory investigation of some sanding parameters to improve the adhesion in leaf-contaminated wheel—rail contactsProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2010
- Rolling–Sliding Laboratory Tests of Friction Modifiers in Leaf Contaminated Wheel–Rail ContactsTribology Letters, 2008
- Twin disc assessment of wheel/rail adhesionWear, 2008
- The “leaves on the line” problem—a study of leaf residue film formation and lubricity under laboratory test conditionsTribology Letters, 2006
- Influence of leaf, humidity and applied lubrication on friction in the wheel-rail contact: Pin-on-disc experimentsProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2004
- A Study of Adhesion Between the Rails and Running Wheels on Main Lines: Results of Investigations by Slipping Adhesion Test BogieProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 1989