JLJoseph Lanigan

Joseph Lanigan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Joseph Lanigan has a total of 55 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Feature importance analysis of low adhesion risk model to find key parameters influencing friction

    by Samuel J. Cartwright, Morinoye Folorunso, Benjamin C. Rothwell, Grazziela Figueredo, Carol Eastwick, Humberto Medina, Roger Lewis, Joseph L. Lanigan

    Low wheel-rail adhesion presents a major safety and economic challenge for the rail industry by causing station overruns and delays. The impact of this (with estimates of costs up to £355 m annually) presents a research opportunity with the potential for significant safety improvements and cost savings. Poor adhesion can be mitigated somewhat using weather forecasting, although this is limited to regional-level resolution and results in reduced averaged speeds. Recent studies have investigated rail cleaning to remove railhead contamination prior to wheel contact, which increases friction and braking performance. Determining when to activate systems for removing contamination on the rail surface is an area of active research with systems combining sensor and camera data with machine learning models recently demonstrating accurate prediction of Coefficient of Friction (CoF) values. While these systems are effective in initial testing, they display a common problem for safety-critical ML systems in a lack of model interpretability due to the “black box” nature of the neural network models used. This study seeks to mitigate poor ML interpretability through the use of Feature Importance (FI) algorithms, to better understand the causes of low wheel-rail friction prediction in ML models. A dataset correlating rail friction measurements against sensor data and rail images is used to train an ensemble of ML models, which are then used alongside a testing dataset to evaluate an array of FI algorithms (SHapley Additive exPlanations, Local Interpretable Model-agnostic Explanations and Permutation Importance). A feature importance fusion algorithm is then applied to assist in interpreting these results. Across a range of feature importance techniques, it is consistently found that atmospheric data such as air temperature and humidity is the strongest predictor of low friction conditions. Tests of similar friction prediction models using only atmospheric data with no photographic images show only a small loss in accuracy. Edge detection is found to be the most useful feature extracted from images, while single-pixel features such as brightness and colour are found to be the least important. This provides insight into best practices for feature selection when designing ML models for the rail industry in future.

  • Open Access

    A Spectroscopic DRIFT-FTIR Study on the Friction-Reducing Properties and Bonding of Railway Leaf Layers

    by Ben White, Joseph Lanigan, Roger Lewis

    Leaves react with rail steel and form a tribofilm, causing very low friction in the wheel/rail interface. This work uses twin-disc tribological testing with the addition of leaf particulates to simulate the reaction and resulting reduction in the friction coefficient in a laboratory setting. Diffuse Reflectance Fourier-Transform Infrared Spectroscopy was carried out on the organic material and the layers that formed on the twin-disc surface. Dark material, visibly similar to leaf layers formed on tracks during autumn, was used along with a transparent thin film. This “non-visible contamination” has been reported to cause low-adhesion problems on railways, but has not previously been characterised. This article discusses the nature of these layers and builds upon earlier studies to propose a degradation and bonding mechanism for the leaf material. This understanding could be used to improve friction management methods employed to deal with low adhesion due to leaves.


  • Open Access

    Field-based investigation of low adhesion leaf layers: Assessing layer initiation and environmental influences

    by Joseph Jaffé, Joseph Lanigan, Roger Lewis

    Changing weather conditions are known to impact on adhesion at the railhead. However, the influence on actual leaf layer “seeding” (formation) and low adhesion has not been measured in the field. This paper presents findings from a field survey conducted in autumn 2023 on a narrow gauge railway in Wales, observing leaf layer initiation, development, and environmental influences on adhesion levels. Using friction testing, timelapse imagery, and chemical analysis, the study examines the impact of weather and layer characteristics on friction. Results show that moisture content in the layer has a significant impact on adhesion levels, with a linear relationship observed between moisture and friction. Leaf layer initiation and development were observed, with water playing a crucial role in layer formation. Chemical analysis revealed the presence of iron oxides and biopolymers in the leaf layers. The results give insight into the variation in adhesion levels in leaf layer that have been measured through indirect measures in the past.


  • Open Access

    Pressure induced transformation of biomass to a highly durable, low friction film on steel

    by Joseph L. Lanigan, Laura Faas, Thomas Butcher, William A. Skipper, Mariana P. Silva, Roger Lewis, Leonardo D. Gomez

    Herein the authors report a detailed insight into the tribological and chemical mechanisms that take place when leaf matter is present at the wheel/rail interface. The approach used enables further insight into the formation and subsequent effects on friction from leaf derived layers. Results shed insight on the process that facilitates the formation of leaf derived layers, their structure and chemical make-up. Our analysis indicates that polyphenols, a chemical family that include tannins, have an important role in layer formation and hypothesis on the layer's stability, when formed under high pressures. The data indicate that the high pressure found at the wheel/rail interface facilitates conversion of biomass into a tenacious, thin film. This is shown by the increase in the amount of phenolic compounds present. Phenolic compounds are typically rich in oxygen functional groups that have the ability to bind to metal ions. This insight into the composition of the film is expected to enable the development of novel remediation strategies. It highlights the potential for cleaning agents to be used as tools for restoring friction to safe values. This should lead to improvements in the operational performance and safety of rail transport for passengers and train operators.


  • Open Access

    “A novel methodology for developing ultra-low adhesion leaf layers on a full-scale wheel/rail rig”

    by Joseph Jaffe, Ben White, Joseph Lanigan, Roger Lewis

    This paper explores a novel method for creating an ultra-low adhesion leaf layer on a rail using a full-scale wheel/rail rig. Ultra-low adhesion layers were generated using leaf powder for the first time on a linear full-scale rig. The layers are compared chemically and physically to other layers from the laboratory and field. Testing of the adhesion evolution of the leaf contaminated layers over 50 cycles is explored, and compared to dry and wet rails.


  • Open Access

    Understanding friction mechanisms of Si-DLC/steel interfaces under aqueous lubrication

    by J. L. Lanigan, R. Lewis

    A key driver in current research on lubricant formulation is the need to move away from older technology that is highly reliant on resources derived from industries associated with high carbon dioxide emissions. In this paper, the adoption of water based (or aqueous) lubrication is explored. This is in direct contrast with most lubricated systems that rely on oil or other petroleum products. In nature, most known biological systems employ aqueous lubrication for tribological contacts, such as those found in cartilage and more widely in mammalian joints including hips and knees giving friction coefficients as low as μ < 0.002. This is achieved very effectively without the presence of an oil or grease as a base lubricant. In most engineering applications, however, oils and greases are used to achieve desired low friction levels. While effective, this comes with the associated higher costs and carbon footprint of using petroleum derived products. In recent years, certain engineering applications have shifted to aqueous lubrication, a notable example of which is stern tube bearings in maritime applications. These are typically low pressure contacts though. Depending on speed of travel this can range from 100–400 MPa. The research detailed in this paper explores the viability of high pressure contacts lubricated with novel aqueous packages and what effects this shift may have on friction and wear profiles of the system. The work reported herein demonstrates that with some modifications, effective lubrication can be achieved using aqueous lubricant packages.


  • Open Access

    Effects of temperature and humidity on railhead friction levels

    by Morinoye O Folorunso, Roger Lewis, Joseph L Lanigan

    This paper explores the research gap involving the links between railhead temperature, relative humidity, and coefficient of friction (adhesion level) at the wheel/rail interface as found on track across the UK. Existing work done in this field has mostly been carried out in laboratories which limits variation of environmental conditions. Weather and friction data were collected from different sites across England, generating a real representation of the railhead conditions. Correlations were established between the environmental dataset and the railhead friction to give a greater insight into the mechanisms of low adhesion and when low adhesion can be expected to take place. This can provide an avenue to better predict the occurrence of low adhesion in the wheel/rail interface, therefore improving safety within the rail network. Results from the data analysis showed that high humidity conditions, independent of the railhead temperature, reduces the adhesion level on the railhead. Showing that low adhesion can occur in warmer temperatures, such as those typically experienced in early autumn where there is high relative humidity.


  • Open Access

    Field trials of a methodology for locomotive brake testing to assess friction enhancement in the wheel/rail interface using a representative leaf layer

    by Joseph L Lanigan, Peter Krier, Luke Buckley Johnstone, Benjamin White, Paul Ferriday, Roger Lewis

    There are two options for testing the performance of rail vehicles and the application of material to the wheel/rail interface to influence friction, and therefore braking performance, in a low adhesion environment: laboratory work which is not representative of conditions in the field, and expensive track tests using fully instrumented modern vehicles largely using low adhesion simulants that are not representative of those that occur in the real world and usually applied over great lengths of track. This paper presents a third option: low-cost track tests. We determined the minimum of equipment and resources needed to produce low adhesion using a method more representative on Autumn conditions on rail and monitor the performance of rail vehicles when braking on it. This was mainly targeted at use for testing products applied to the wheel/rail interface to enhance traction, hence the need for real low adhesion causes. We present the methodology that we have developed, and some initial results showing that using it we can generate a low adhesion scenario when braking from 10 mph. This can be used to develop mitigation solutions for low adhesion in a more cost effective manner.


  • Open Access

    The composition and friction-reducing properties of leaf layers

    by Michael Watson, Benjamin White, Joseph Lanigan, Tom Slatter, Roger Lewis

    Every autumn rail networks across the world suffer delays, accidents and schedule changes due to low friction problems caused by leaves landing on the rails. These leaves form a layer that can reduce the friction between the wheel and the rail to a similar level as that between ice and an ice-skate ( μ = 0.01 – 0.05 ). Previous works have generated several hypotheses for the chemical reactions and low friction mechanism associated with these layers. In this work, the reaction between an aqueous extract of sycamore leaves and metallic iron is investigated. This reaction has been shown to produce a black precipitate, which matches field observations of leaf layers, while friction tests with these extracts produce characteristic ultra low friction. The reaction is investigated through FTIR, XPS, CHNS and ICP-MS analysis as well as wet chemical testing. The impact of the reaction on friction is investigated through three rounds of tribological testing. The results indicate that the black precipitate produced is iron tannate, formed by complexation of tannins with dissolved iron ions. Friction testing showed that eliminating tannins from the leaf extract resulted in a significant increase in the friction coefficient compared with the control.


  • Open Access

    An analysis of the quality of experimental design and reliability of results in tribology research

    by Michael Watson, Peter Christoforou, Paulo Herrera, Daniel Preece, Julia Carrell, Matthew Harmon, Peter Krier, Stephen Lewis, Raman Maiti, William Skipper, et al.