The In-situ Wear of a Hot and Cold Switched Au on Au Coated MWCNT Electrical Contact for a MEMS Switch Application
Authors:
- 1 September 2019
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 5, 149-155
Abstract
The electrical contacts in metal-metal MEMS switches are normally made from thin (> $1~\mu \text{m}$) metallic film, e.g., (Au). The low contact force in a MEMS device results in a small area for conduction; to increase the area, a composite contact material has been developed. Sputter coated Au, applied to vertically-aligned multi-walled carbon nanotubes, (Au-MWCNT composite), has been shown to increase contact area and extend switching lifetime by orders of magnitude. In this study the Au-MWCNT composite contact is paired with a Au coated hemisphere contact under a contact force of$150~\mu \text{N}$, in an In-situ Contact Evolution (ICE) apparatus, to evaluate the durability of the contacts for two DC switching conditions; cold switching, at 4 V, $4~\mu \text{A}$, ($16\mu \text{W}$) and hot switching at 4 V, 50 mA (200mW). Under cold switching the contacts are shown to maintain a low stable resistance for 4 Billion cycles. The result leads to a re-evaluation of an established fine transfer model, used to predict switching life times.
Keywords
This publication has 14 references indexed in Scilit:
- Basic electrochemical properties of sputtered gold film electrodesElectrochimica Acta, 2017
- A review of micro-contact physics, materials, and failure mechanisms in direct-contact RF MEMS switchesJournal of Micromechanics and Microengineering, 2016
- Improving Gold/Gold Microcontact Performance and Reliability Under Low-Frequency AC Through Circuit LoadingIEEE Transactions on Components, Packaging and Manufacturing Technology, 2016
- Investigating the benefits of a compliant gold coated multi-walled carbon nanotube contact surface in micro-electro mechanical systems switchingApplied Physics Letters, 2015
- The Wear of Hot Switching Au/Cr-Au/MWCNT Contact Pairs for MEMS ContactsIEICE Transactions on Electronics, 2015
- A review of micro-contact physics for microelectromechanical systems (MEMS) metal contact switchesJournal of Micromechanics and Microengineering, 2013
- Evaluating the Influence of Current on the Wear Processes of Au/Cr-Au/MWCNT Switching Surfaces2013
- The Wear Processes of Gold Coated Multi-Walled Carbon Nanotube Surfaces Used as Electrical Contacts for Micro-Electro-Mechanical SwitchingNanoscience and Nanotechnology Letters, 2010
- Improving the contact resistance at low force using gold coated carbon nanotube surfacesThe European Physical Journal Applied Physics, 2010
- Characterization of Gold–Gold Microcontact Behavior Using a Nanoindenter Based SetupJournal of Adhesion Science and Technology, 2010