Determination of Interlaminar Residual Thermal Stresses in a Woven 8HS Graphite/PMR-15 Composite Using X-Ray Diffraction Measurements
Authors:
- B. BenediktBBB. Benedikt
- P. RupnowskiPRP. Rupnowski
- L. KumosaLKL. Kumosa
- J. K. SutterJSJ. K. Sutter
- P. K. PredeckiPPP. K. Predecki
- M. KumosaMKM. Kumosa
- 1 October 2002
- journal article
- research article
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 9 (4) , 375-394
Abstract
This work is a continuation of the research recently presented in [1] and [2] on the determination of residual thermal stresses in graphite/polyimide composites with and without externally applied bending loads. In the previous work [1, 2] a combined experimental and numerical methodology for the determination of the residual stresses in unidirectional graphite/PMR-15 composites based on X-ray diffraction (XRD) measurements of residual strains in embedded aluminum (Al) and silver (Ag) inclusions has been presented. In this research, the previously developed approach has been applied to evaluate the residual thermal interlaminar stresses in an 8 harness satin (8HS) woven graphite/PMR-15 composite. First, residual thermal stresses have been measured by XRD in aluminum inclusions embedded between the first and second plies of a four-ply 8HS woven graphite/PMR-15 composite. The measurements have been conducted with the composite specimens subjected to four-point bending deformations. Second, viscoelastic computations of interlaminar residual stresses in the composite have been performed using classical laminated plate theory (CLPT) following the manufacturing procedure. Third, the residual strains and stresses in the inclusions have been numerically predicted using the viscoelastic Eshelby model for multiple spherical inclusions. Finally, the interlaminar residual stresses in the composite have been extracted from the XRD strains in the Al inclusions, again using the viscoelastic Eshelby model, and subsequently compared with the residual stresses from the CLPT. It has been shown in this study that the residual interlaminar thermal stresses can be accurately determined not only in unidirectional graphite/polyimide systems as presented in [1] and [2], but also in woven graphite polymer matrix composites.Keywords
This publication has 18 references indexed in Scilit:
- The use of X-ray diffraction measurements to determine the effect of bending loads on internal stresses in aluminum inclusions embedded in a unidirectional graphite-fibre/PMR-15 compositeComposites Science and Technology, 2001
- An analysis of residual thermal stresses in a unidirectional graphite/PMR-15 composite based on X-ray diffraction measurementsComposites Science and Technology, 2001
- PROCESS-INDUCED RESIDUAL STRESS ANALYSIS OF AS4/3501-6 COMPOSITE MATERIALMechanics of Advanced Materials and Structures, 1998
- Thermoviscoelastic Analysis of Residual Stresses and Warpage in Composite LaminatesJournal of Composite Materials, 1992
- Nonlinear Behavior of Woven Fabric CompositesJournal of Composite Materials, 1983
- In-Plane Thermal Expansion and Thermal Bending Coefficients of Fabric CompositesJournal of Composite Materials, 1983
- Stress measurement in graphite/epoxy uniaxial composites by X‐raysPolymer Composites, 1980
- Analysis of Properties of Fiber Composites With Anisotropic ConstituentsJournal of Applied Mechanics, 1979
- Stress Measurement in Graphite/Epoxy Composites By X-Ray Diffraction from FillersJournal of Composite Materials, 1979
- The determination of the elastic field of an ellipsoidal inclusion, and related problemsProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1957