Evaluating the stiffness of a cast strip for protecting a preparatory mine working
Open Access
- 30 April 2025
- journal article
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (1 (134)) , 40-50
Abstract
The object of this study is the deformation processes in a protective structure of the preparatory working, maintained in the excavated space of the excavation area. The task addressed was ensuring the stability of the preparatory working in a deep coal mine to improve the safety of miners and coal mining. The assessment of the strength of the cast strip for the protection of preparatory workings in excavation areas has been substantiated. It was experimentally established that in the zone of active influence of mining pressure on the section 0<l<50 m behind the treatment face, there is an exponential dependence between the length of the working l (m) and the relative change in the volume dV of the protective structure. It characterizes the safe deformation resource of the cast strip. Within its limits, the process of gaining strength of the protective structure occurs. At dV<0.18 and the failure rate of the arched flexible support ω0.22, and 0.22<ω80 m behind the breakage face, the level of threat of roof collapses approaches a critical state, which is associated with an uncontrolled increase in lateral rock displacements due to the loss of strength of the cast strip. The cast strip performs the functions of a supporting structure only in a certain range of physical, mechanical, and deformation properties. The operational condition of the preparatory working is ensured within the deformation resource of the cast strip. After reaching the rated strength of the cast strip, its strength makes it possible to limit the movement of lateral rocks on the contour of the working and ensure its stability at a distance of l£80 m along the length of the excavation sectionKeywords
This publication has 18 references indexed in Scilit:
- Study on the new layout pattern about the gob‐side entry under dynamic pressure and its surrounding rock stability controlEnergy Science & Engineering, 2024
- Stability analysis and control technology of gob-side entry retaining with double roadways by filling with high-water material in gently inclined coal seamInternational Journal of Coal Science & Technology, 2022
- Determination of Reasonable Width of Filling Body for Gob-Side Entry Retaining in Mining Face with Large Cutting HeightGeofluids, 2022
- Waste rock filling in fully mechanized coal mining for goaf-side entry retaining in thin coal seamArabian Journal of Geosciences, 2019
- The Analysis of Time Series2019
- Maintenance of reusable mine workings during the augering mining of coal seamsE3S Web of Conferences, 2018
- Research on the width of filling body in gob-side entry retaining with high-water materialsInternational Journal of Mining Science and Technology, 2018
- Technological schemes for supporting reused gate roads by the cast stripsGeo-Technical Mechanics, 2018
- Ground Engineering - Principles and Practices for Underground Coal Mining2016
- A Modern Introduction to Probability and Statistics2005