Methodology to Realize Wideband High Efficiency Power Amplifier Using Active Harmonic Injection
Authors:
- 1 December 2019
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Abstract
This paper presents a methodology to improve the efficiency of a power amplifier in broadband using an active harmonic injection. The harmonic signal is injected to operate the power amplifier similar to the Class J mode. The second harmonic signal is generated on-board using a frequency doubler whose input is the same as that of the power amplifier. As a proof of concept, a prototype is designed with frequency doubler using 10 W GaN HEMT that generates a second harmonic signal and injects at the drain of main PA designed with 15 W GaN HEMT. The measured results show the drain efficiency of 60.02% to 75.13% with the output power of 42.3 to 42.99 dBm over the band of 600 MHz ranging from 1.2-1.8 GHz. The measured carrier to third order intermodulation distortion is better than -15 dBc in the overall operating band.Keywords
This publication has 7 references indexed in Scilit:
- Investigating Continuous Class-F Power Amplifier Using Nonlinear Embedding ModelIEEE Microwave and Wireless Components Letters, 2017
- Class-F GaN power amplifier design using model-based nonlinear embedding2015
- High-Efficiency Power Amplifier Using an Active Second-Harmonic Injection Technique Under Optimized Third-Harmonic TerminationIEEE Transactions on Circuits and Systems II: Express Briefs, 2014
- Broad-band matching network using band-pass filter with device parasitic absorption2013
- PA Efficiency and Linearity Enhancement Using External Harmonic InjectionIEEE Transactions on Microwave Theory and Techniques, 2012
- On the Continuity of High Efficiency Modes in Linear RF Power AmplifiersIEEE Microwave and Wireless Components Letters, 2009
- Class-E, Class-C, and Class-F power amplifiers based upon a finite number of harmonicsIEEE Transactions on Microwave Theory and Techniques, 2001