SiGe BiCMOS PAM-4 clock and data recovery circuit for high-speed serial communications
Authors:
- 23 January 2004
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 305-308
Abstract
A multilevel clock and data recovery (CDR) circuit for high- speed serial data transmission was designed using the IBM 6HP 0.25 µm SiGe BiCMOS process technology. The circuit extracts the clock from a 32 Gb/s 4-level pulse amplitude modulated (PAM-4) input signal and outputs four channels of retimed NRZ data at 8 Gb/s per channel. The CDR design incorporates a PAM-4 to 2-bit-binary converter, a phase/frequency detector, a loop filter, a quadrature LC ring oscillator and a data-retiming module. The circuit operates using a 3.3V supply voltage with a 350mA current consumption. The simulation results show that the peak-to-peak jitter is 1.3 ps, the capture range is 2 GHz, the acquisition time is 200 ns and the input sensitivity is 150 mV. This PAM-based CDR technique is quite suitable for low-loss transmission channels such as fiber optic communications or short-distance copper links, including network-on-chip (NOC) implementations and storage area networks (SANs).Keywords
This publication has 7 references indexed in Scilit:
- Equalization of a dynamic channel with forward error correction using an adaptive precoder2003
- A low-power 8-PAM serial transceiver in 0.5-μm digital CMOSIEEE Journal of Solid-State Circuits, 2002
- High-speed CMOS analog Viterbi detector for 4-PAM partial-response signalingIEEE Journal of Solid-State Circuits, 2002
- BiCMOS technology for mixed-digital, analog, and RF applicationsIEEE Microwave Magazine, 2002
- A 0.3-/spl mu/m CMOS 8-Gb/s 4-PAM serial link transceiverIEEE Journal of Solid-State Circuits, 2000
- A monolithic 2.3-Gb/s 100-mW clock and data recovery circuit in silicon bipolar technologyIEEE Journal of Solid-State Circuits, 1993
- A Si bipolar phase and frequency detector IC for clock extraction up to 8 Gb/sIEEE Journal of Solid-State Circuits, 1992